Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Foxtech Hawk-130X Pro
Summary of Contents for Foxtech Hawk-130X Pro
- Page 1 Hawk-130X Pro UAV LiDAR Scanning System Operation Manual...
- Page 2 Introduction Hawk 130X is a kind of short range & compact LiDAR point cloud data acquisition system, integrated HESAI Pandar XT laser scanner, GNSS and IMU positioning and attitude determination system, Camera and storage control unit, is able to real-time, dynamically, massively collect high-precision point cloud data and rich image information.
- Page 3 Hawk -130X Pro Side View and LED Indicators Hawk- 130X Back View and LED Indicators 1 TF Card Slot, 1 Type C Interface...
- Page 4 Standard Operation Flow Hawk-130X Pro LiDAR Scanning System Standard Operation Flow as following, 1. Fix the Hawk-130X Pro lidar scanning system to the carrier (drone or car, etc). 2. Install the GNSS antenna on the carrier without any interference, and connected to Hawk-130X Pro LiDAR Scanning system directly.
- Page 5 "Scan and Repair", otherwise the data in the TF card may not be read and written normally. Hawk-130X Pro contains G64GB eMMC (The real capacity is 54 GB) Flash memory for backing up the collected data to prevent data loss due to accidental damage of the TF card.
- Page 6 Hawk -130X Pro LED Indicators Instruction Refer to the 4 LED indicators as above mentioned, description as following P LED Indicator Light on : Power on Is on after Power on Turn off : No power or abnormal Fast blink: the TF card is not inserted, or it is inserted but the connection is not good G LED Indicator Light off : Unlock the satellite.
- Page 7 Hawk -130X Pro LiDAR configuration file Users can configure some functions of Hawk-130X Pro The standard configurable functions currently provided are as follows, Trigger signal interval: isochronous interval trigger, unit: second and equidistant interval trigger, unit: meter Trigger signal mode: high level trigger (normal low level, high level when triggered);...
- Page 8 Hawk -130X Pro Troubleshoot An abnormal situation happen when use, please handle it according to this table. Please check whether the power polarity is After power on, the power indicator correct and the power connector is connected is not on The micro SD card is not inserted, or it is Power indicator fast blink inserted but the connection is not good...
Need help?
Do you have a question about the Hawk-130X Pro and is the answer not in the manual?
Questions and answers