Philips S Line 242S9 User Manual page 13

2. Setting up the monitor
242S9JML
1. Extend the monitor base to its
maximum height.
2. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen. Then lift
the monitor stand.
3. While keeping the release button
pressed, tilt the base and slide it out.
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always contact
manufacturer for wall-mount installation.
242S9AL
242S9JAL
242S9JML
* Display design may differ from those
illustrated.
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that the
monitor does not tilt downward by
more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
11
100mm
100mm
100mm
100mm
100mm
100mm
0°
-5°
90°