2. Setting up the monitor
Height adjustment
Pivot
0°
-90°
Warning
•
To avoid potential screen damage,
such as panel peeling, ensure that the
monitor does not tilt downward by
more than -5 degrees.
•
Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel
130mm
0°
90°
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the monitor
base, please follow the instructions below
to avoid any possible damage or injury.
242S9AL/242S9JAL
1. Place the display face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
242S9AL
242S9JAL
2. Loosen the assembly screws, then
detach the neck from the monitor.
242S9AL
242S9JAL
10