Table of Contents
Advertisement
– If the buttons are held down, the set values automatically run
²
– The respective programme duration is displayed by selecting
Ø
²
Ø
Ø
Extra rinse
z
Rinse Hold
16
through.
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings/
options, foam detection, unbalanced load detection, the load
or soiling.
:
ecoPerfect
¦
Energy-optimised washing by reducing the temperature while
achieving a consistent washing result. When selected, the
display lamp is lit.
The washing temperature is lower than the selected
temperature. For special hygiene requirements, the Hygiene
programme is recommended. ~ Page 24
speedPerfect
G
For a shorter wash time with a comparable washing effect to
the standard programme. Observe maximum load. Refer
to ~ Page 22
When selected, the display lamp is lit.
Options. Overview of all options ~ Page 30
ß
Select
Options and e.g.
ß
60°C
Water Plus
b
– Select option by pressing the two buttons displayed on the
left.
– Select/deselect option by pressing the two buttons
displayed on the right. The selected options are
immediately active.
In the case of multi-level settings keep touching the
buttons to run through the settings automatically.
– Wait or back to the main menu by pressing
button.
:
Water Plus button:
z
2:31h
1400
0
c
z
on
è
b
c
Options
ß
Advertisement
Table of Contents
