Table of Contents
Advertisement
en Installation instructions
Press on the tap spindle and turn it anti-clockwise.
4.
Gas therefore comes to the nozzle.
a If dispersions and bubbles occur on the foamy sur-
face and these indicate that gas is escaping, follow
the instructions in the section entitled "What to do if
there is a gas leak" → Page 51.
23.7 Checking the correct burner behaviour
Check the burning and soot formation of each burner
after the product has been converted to a different gas
type. If there is a problem, compare the nozzle values
with the values in the table.
Checking the correct burner behaviour of the
cover burner
1.
Ignite the gas cooker burners in accordance with
the instructions in the operating manual.
→ "Operating the hotplate", Page 17
Set the gas cooker knob to the small flame setting.
2.
Check whether the flame safety system is working
by keeping the flame at the "small flame" setting for
one minute.
Nozzle values for the auxiliary burner
Note the following information for the gas types that are listed in the table for some burners.
Gas pressure (mbar)
Nozzle (mm)
1
Bypass nozzle
(mm)
Max. input power (kW)
Min. input power (kW)
Gas flow at 15 °C and
3
1013 mbar m
/h
Gas flow at 15 °C and
1013 mbar g/h
1
Use the bypass nozzle with the appropriate diameter that is included in the set.
Nozzle values for the standard-output burner
Note the following information for the gas types that are listed in the table for some burners.
Gas pressure (mbar)
Nozzle (mm)
1
Bypass nozzle
(mm)
Max. input power
(kW)
Min. input power (kW) ≤0.9
1
Use the bypass nozzle with the appropriate diameter that is included in the set.
52
G20/
G20
G20
G25
20/25
20
25
0.72
0.72
0.68
0.52/0.
0.52/
0.52/
5
0.5
0.5
1
1
1
≤0.55
≤0.55
≤0.55
0.095/
0.095
0.095
0.111
-
-
-
G20/
G20
G20
G25
20/25
20
25
0.97
0.97
0.91
0.6/0.5
0.6/0.
0.6/0.
8
58
58
1.75
1.75
1.75
≤0.9
≤0.9
Check that the burners are burning correctly with
3.
both large and small flames.
a The flame must burn evenly and steadily.
Turn the burner knob back and forth quickly
4.
between the large flame setting and the small flame
setting. Repeat this process several times.
a The gas flame must not flicker or go out.
23.8 Technical data – Gas
The different types of gas and the corresponding val-
ues are listed.
Information on some types of gas
Note the following information for the gas types that are
listed in the table for some burners.
Type of gas
G20/25
(20/25 mbar)
G2.350
(13 mbar)
G30 (50 mbar)
G25
G25
G25.3 G30/
20
25
25
0.77
0.72
0.72
0.52/
0.52/
0.52/
0.5
05
0.5
1
1
1
≤0.55
≤0.55
≤0.55
0.111
0.111
0.108
-
-
-
G25
G25
G25.3 G30/G31 G30
20
25
25
1
0.94
0.94
0.6/0.
0.6/0.
0.6/0.
58
58
58
1.75
1.75
1.75
≤0.9
≤0.9
≤0.9
Explanation
For France and Belgium
For Poland
The after-sales service must order
the nozzle set HEZ353110.
G30
G30
G31
28–
50
37
30/37
0.50
0.43
0.47
0.32/
0.32/
0.32/
0.3
0.3
0.3
1
1
1
≤0.55
≤0.55
≤0.55
-
-
-
73/71 73
73
G30
28–
50
37
30/37
0.65
0.58
0.62
0.4/0.38 0.4/0.
0.4/0.
38
38
1.75
1.75
1.75
≤0.9
≤0.9
≤0.9
G27
G2.350
20
13
0.77
1.00
0.52/
0.52/
0.5
0.5
1
1
≤0.55
≤0.55
0.116
0.132
-
-
G27
G2.350
20
13
1
1.31
0.6/0.
0.6/0.
58
58
1.75
1.75
≤0.9
≤0.9
Advertisement
Table of Contents
