Surface Angle Mounting Instructions - JBL 08GTi Installation Manual

Surface Angle Mounting
Instructions
a) Using the Surface Angle
Mount template at the back of
the manual, drill two screw holes
at the desired mounting location.
Secure the Surface angle mount
adapter with two
screws as shown in figure B.
b) Secure the mounting plate to
surface angle mount adapter
using two 5 ⁄ " screws.
1 6
c) Run the included speaker wire
with the 08GTi crossover to the
wire through hole and connect
12
3 ⁄ " sheet metal
4
the wire to the tweeter making
sure to connect + to + and
– to –.
d) Push the tweeter down onto
the mounting plate making sure
to line up the bayonet tabs with
the slots in the tweeter housing.
e) Twist the tweeter clockwise
about ⁄ " to lock it into position.
1
4