Table of Contents
Advertisement
Operation Manual / TPL67-C.. - TPL71-C..
8 Disassembly and assembly / 8.7 Installing cartridge group
© Copyright 2020 . All rights reserved.
Remove cover from oil connection.
u
Fit flange (42044) with screws (42064) and new gasket (42045).
u
Attach one lifting gear each to the two ribs of the bearing casing
u
provided for this purpose.
Remove supports (90450) and carefully insert cartridge group.
u
CAUTION
If the rotor blades have insufficient or no clearance, the blades and cas-
ing could be damaged.
Check that the blades do not rub on the turbine diffuser by rotating
u
the rotor.
Uniformly tighten the three screws (61059) with Verbus Ripp® wash-
u
ers (61058).
Remove the lifting gear.
u
Screw in the speed sensor (86505) together with the O-ring (86506)
u
and plug in the cable connector (86515).
HZTL2488_EN
Rev.G
March 2020
Advertisement
Table of Contents
