Flash Furniture HG-3WPB21-K04-K-BK-GG Assembly Instructions

500
LBS
TWIN SIZE
ASSEMBLY INSTRUCTIONS
Before You Begin:
Please indentify all component parts and hardware pieces required before you begin. Carefully remove
all of the components from the packaging and set aside for assembly. Assemble on a soft surface to
prevent scratching during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or
components may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where
included) to help prevent the unit from tipping and causing accidental injury, instability, death or damage. The
tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall Straps
suitable for the unit weight and wall materials (if not included) should be purchased and installed.
..................................................................................................................................................................................
Customer Service Email:
HG-3WPB21-T01-T-BK-GG / HG-3WPB21-F02-F-BK-GG /HG-3WPB21-Q03-Q-BK-GG / HG-3WPB21-K04-K-BK-GG
HG-3WPB21-T01-T-GY-GG / HG-3WPB21-F02-F-GY-GG /HG-3WPB21-Q03-Q-GY-GG / HG-3WPB21-K04-K-GY-GG
Thank you for your purchase!
PLATFORM BED FRAME
250
LBS
250
LBS
FULL SIZE
CustomerExperience@belnick.com
400
LBS
400
LBS
QUEEN SIZE
| Phone: 866-552-2810
400
LBS
400
LBS
KING SIZE