Cleaning Brush Roll - Hisense RVCL144AB HSN Instruction Manual

CLEANING WATER TANK AND MOP CLOTH
1. Once finished mopping, press the water tank release button
and pull to remove the water tank. Detach the mop holder by
pulling them apart and remove mop cloth from holder.
2. Wash the mopping pad by hand and dry THOROUGHLY.
If specified on mop cloth you can wash in washing machine.
3. Open the cover and pour out the remaining water in the water
tank. Wipe dry the water tank. Exposure to sunlight is not
recommended.
EN-19
CLEANING BOTTOM SENSORS AND WHEELS
Wipe the sensor and wheels gently with a soft cloth, as shown in
the figure.
CLEANING CHARGING STATION TERMINALS
Wipe the charging terminals on both the robot and charging dock
with a soft cloth, as shown in the figure.

CLEANING BRUSH ROLL

Brush roll can removed by removing protective cover. Then you
can clean threads or hair wrapped around the brush roll with
included brush cleaner. Use sharp V shape blade within it.
Wash with water and dry THOROUGHLY.
EN-20