Advertisement
Quick Links
1
Thank you for purchasing bike
carrier from us. First please
check all items in the box: bike
carrier, 6 rubber straps, 4
protective foam pad, 2 Velcro
straps, and 2 tie down straps.
4
After the bike carrier is correctly
placed as illustrated in diagram 3,
tighten the black hubs by flipping
the hub lever inward.
Make sure the teeth of the black
hubs are interlocked evenly.
2
Loosen the black hubs by flipping
the hub lever outward This will
allow the two sections of the rack
frame to move relative to one
another for correct placement on
your vehicle.
5
Begin attaching straps with the
upper pair by pressing the buckle
to release the strap.
Rubber strap
1
2
Patented bike holder
3
Bike support arm
4
Hubs
Handle
5
Upper strap
6
7
Safety strap
8
Buckle
9
Protective foam pad
Middle strap
10
Bottom strap
11
Hook
12
13
Rubber foam
3
Rest the bike carrier on the rear
bumper of vehicle. Note: the
protective rubber pads on lower
frame should be rest between the
bumper and trunk. Rear brace should
rest on the trunk lid and the
supporting arm should be adjusted
10 to 30 degree above the horizon.
6
Placing the hooks in the most
forward trunk lid opening(between
rear window and trunk lid), and then
pulling on the end of the strap until it
is tight. Caution: Never install the
hook on the plastic spoiler.
Advertisement
Related Manuals for Rage BC-07518-3H
Summary of Contents for Rage BC-07518-3H
- Page 1 Rubber strap Patented bike holder Bike support arm Hubs Handle Upper strap Safety strap Buckle Protective foam pad Middle strap Bottom strap Hook Rubber foam Thank you for purchasing bike Loosen the black hubs by flipping Rest the bike carrier on the rear carrier from us.
- Page 2 ITEM:BC-07518-3H NAME:Trunk mounted bike carrier Follow the same procedure in The bottom straps with hooks can After the hooks are attached, pull diagram 6 for the other side. be attached to the space between them against the buckle until they trunk lid and rear bumper.
- Page 3 Snap the end of rubber strap into After the bike is mounted, pull the rubber The patented bike holder can strap over to the protrusion part on the the protrusion part of the bike secure the bike’s seat tube with other end of the bike holder.
- Page 4 ITEM:BC-07518-3H NAME:Trunk mounted bike carrier CAUTION 1.1 This carrier has been designed and manufactured to attach securely to a variety of vehicles. The attachment of this carrier to a vehicle is safety critical and beyond the control of the manufacturer.
Need help?
Do you have a question about the BC-07518-3H and is the answer not in the manual?
Questions and answers