Table of Contents
Advertisement
4. Maintenance Kit Installation - Part number: 1503-820
To ensure the F4 Inserter maintains optimal performance and reliability, it is recommended
the following Maintenance Kit components are replaced when showing any signs of wear. If
the arms or actuating rod movement is no longer smooth this is a sign that these parts are
worn and need replacing.
The maintenance kit comprises of:
Item Description
A
F4 Inserter – Actuating Rod
B
F4 Inserter – Lower Arm (Including new wear pad)
C
F4 Inserter – Upper Arm (Including new wear pad)
D
0-Ring 1" x 3/32
E
F4 Inserter – Arm Spacer
4.1 Actuating Rod Replacement
Use an 8mm spanner and 8mm socket to undo the hex head bolts holding on the upper and
lower arms and remove them. Use an Allen Key to remove the 10 x Cap screws from the F4
handle housing (Part No 22 & 23). Separate the two handle parts (Part No 16 & 17)
allowing access internally.
Remove upper and lower arms and cap screws
Adept Ltd, 2-6 McDonald Street, Morningside, Auckland 1025, New Zealand
www.adeptclip.com
Part No
1503-011E
1510-011
1510-012
1503-015
1503-003
Separate left and right hand body parts
Qty
1
1
3
10
4
Page 6 of 10
Advertisement
Table of Contents
