Suspending The F4 Inserter - adept technology F4 INSERTER Instruction And Service Manual

The F4 Inserter air inlet has a ¼" BSP female thread which is supplied fitted with a standard
¼" male ARO connector. If this type of connector is not suitable, it may be changed to suit
the coupling system available.

2.2 Suspending the F4 Inserter

The F4 Inserter is supplied with a spring hook carabiner on the top of it. This is where you
will attach a Coil Spring Balancer allowing it to hang at a convenient position and angle. The
weight of the F4 Inserter and supplied pressure hose is approximately 2 kg. The coil spring
balancer must be selected to suspend 2 kg.
Adept Ltd, 2-6 McDonald Street, Morningside, Auckland 1025, New Zealand Page 4 of 10
www.adeptclip.com