Mounting Options; Speaker Connections - JBL SCS 10 Owner's Manual

M O U N T I N G O P T I O N S
Satellites and Surrounds
On shelves.
Wall-Mounting
Thread the wallplate on the
base and rotate fully.
Do not overtighten.
The customer is responsible
for proper selection and use of
S P E A K E R C O N N E C T I O N S
Connection Tips
4
On the wall. Wall brackets are
included.
Attach plate to wall. The
brackets should be placed, if
possible, so that the screws
will fasten into a wooden wall
stud. If that is not possible, use
properly selected wall anchors.
mounting hardware, available
through hardware stores, to
Separate and strip the ends of
the speaker wire as shown.
Speakers and electronics
terminals have corresponding
(+) and (–) terminals. Most
manufacturers of speakers and
electronics, including JBL, use
red to denote the (+) terminal
and black for the (–) terminal.
The (+) lead of the speaker wire
is noted with a stripe. It is im-
portant to connect all speakers
identically: (+) on the speaker
to (+) on the amplifier and (–) on
the speaker to (–) on the ampli-
On optional stands (TS 1).
Place speaker on
wall plate.
properly and safely wallmount
the speakers.
fier. Wiring "out of phase"
results in thin sound, weak
bass and a poor stereo image.
With the advent of multichannel
surround-sound systems,
connecting all of the speakers
in your system with the correct
polarity remains equally
important in order to preserve
the proper ambience and
directionality of the program
material.