Related Manuals for Softneta MedDream
Summary of Contents for Softneta MedDream
- Page 1 UAB Softneta K. Barsausko st. 59, LT 51423 Kaunas, Lithuania info@softneta.com www.softneta.com MedDream (version 8.0.0) INSTALL MANUAL of MedDream video viewing and converting functionalities version 4.6.1...
- Page 2 Such references are intended neither as an approval nor a recommendation of these products. Softneta UAB accepts no liability for the performance or use of such products. Other brand names, software and hardware names used in this user`s manual is subject to trademark or patent protection. The quoting of products is for informational purposes only and does not represent a trademark misuse.
-
Page 3: Table Of Contents
API restriction ................................35 Password ..................................35 Firewall ..................................35 Other programs ................................36 Access audio and video devices ..........................36 Local archive ................................36 Installator ..................................36 Figures ....................................37 Index ....................................38 Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 4: Explanation Of Symbols Used
NOTE! Information, hints and advice for a better understanding of the instructions to be observed in the operation of the instrument. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 5: Warnings Regarding Residual Risks
CAUTION! VS software will try to scale medical device output signal to match settings. It is recommended to select close enough or the same resolution for medical device output signal to ensure best quality. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 6: Introduction
Introduction NOTE! Further in text MedDream video viewing and converting functionalities will be referred to MedDream VideoStation or short name VS. Intuitive user interface, simple, but very powerful software controllable by touchscreen Medical Panel PC. Storing locally more than 125 hours of HD videos and up to 100.000 of still images. -
Page 7: Minimal Requirements
NOTE! We recommend upgrade PC or reduce video quality, if it does no match minimal requirements for recording, playing and streaming at the same time. If you faced with such a problem, please contact Softneta UAB Customer support – e-mail support@softneta.com and we will help you resolve it. -
Page 8: Software Installation / Updates
Other ports can be configured via VS application settings. NOTE! If you use capture board - install drivers before VS setup. Download VS setup file from Softneta webpage. Run executable file MedDreamVideoStationSetup-x.x.x.exe to start installation. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 9: Figure 3. Setup File
Figure 5. Select components you want to install VS setup will generate passwords, but you can change and set your own known passwords. All data about passwords will be placed in C:\MedDreamStation\login.txt file. After change, click “Next”. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 10: Figure 6. Vs Connections
VS setup display information about installing software. To start installation, click “Install”. Figure 7. Ready to install page Wait while setup installation complete (copy files, install and start application services). Figure 8. Progress page Complete VS installation: Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 11: Update Software
VS setup detect current passwords from files and test connection, but you can change and set your own known passwords. All data about passwords will be placed in C:\MedDreamStation\login.txt file. After change, click “Next”. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 12: Figure 11. Connection Test Page
Figure 12. Bad root password VS setup display information about installing software. To start installation, click “Install”. Figure 13. Ready to install page Wait while setup installation complete workstation, first older version will be uninstalled and new installed. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 13: Software Uninstalls
Figure 15. VS success installed Software uninstalls To uninstall software, go to Control or Settings and select Uninstall. Figure 16. Programs and Features VS file for uninstalling. Or go to installed VideoStation directory and select “unins00x.exe”. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 14: Videostation Setup
VideoStation Setup VS settings located in OTHER > SETTINGS of main menu. NOTE! In order to ensure successful VS work, the settings must be modified only by the system administrator. Figure 20. VS settings Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 15: Settings
• Press the pedal button and will see KEY BINDING LISTENER will display key combination. • Add key combination to SNAPSHOT or PLAY/STOP KEY by pressing button. To remove previous key combination - press Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 16: Network Settings
LOCAL – VS DICOM file receiver. This allows to send DICOM files (studies) to VS. • AET TITLE – max 16 Latin1 characters. Requires to ask your administrator for this entity title to identify VS PC. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 17: Figure 24. Local Vs Settings
HOST OR IP ADDRESS – DICOM archive host or IP address. It is recommended to set IP address for faster network lookup. • PORT – max 65535 number. DICOM protocol common use is 104 or 11112 ports. Recommended to consult administrator. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 18: Recording Settings
NOTE! Receiving modalities worklist typically requires LOCAL VS AE TITLE to be registered on hospital's Worklist server. Once all settings are set, double check and press save button Recording settings Recording settings let you manage video input sources. Allows to define multiple input source configurations – profiles. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 19: Figure 27. Recording Settings
RECORDING PROFILE SETTINGS window to configure the recording profile. Also, there is direct access to recording profile settings from near stream window - settings button: Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 20: Device Settings
DEVICE – select found video devices, like camera or video capture board. NOTE! If cannot see any devices or some is missing – please check connection cables to the device. If problem persist - check Windows OS device list, if all drivers installed properly. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 21: Figure 30. Specifying Video And Audio Inputs In The Recording Profile Device Settings
Figure 31. Specifying video standard and color space in the Recording profile Device settings • VIDEO STANDARD – specify standard for the analog video signal, if creating profile for analog input device. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 22: Figure 32. Specifying Video And Image Attributes In The Recording Profile Device Settings
INTERLACED VIDEO – set if video signal is interlaced. FRAME RATE – set wanted frame rate. Figure 33. Display calibration options in the Recording profile Device settings • DISPLAY CALIBRATION – enhance video for better view. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 23: Recording Configuration, Settings
CAUTION! VS software will try to scale medical device output signal to match settings. It is recommended to select close enough or the same resolution for medical device output signal to ensure best quality. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 24: Figure 35. Video Encoding Options In The Recording Profile Recording Settings
ENCODING COMPLEXITY – enter the values from 0 for the best speed to 6 for the best quality. ENCODING GROUP OF FIGURES (GOP) – enter values from 0 up to 255. 0 is for auto selection. The recommended value is frame rate multiplied by 2. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 25: Stream Settings
To view and edit the streaming settings for the profile, select the STREAM menu in RECORDING settings. NOTE! If profile has DIRECTSHOW enabled in DEVICE settings, streaming is not possible and the STREAM settings menu is not available. Figure 37. Video encoding options in the Recording profile Stream settings Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 26: Figure 38. Stream Output Options In The Recording Profile Stream Settings
DICOM standard. • ASPECT RATIO X,Y – set aspect ratio by resolution or manually change values. • INTERLACED VIDEO – enables interlace. The default value is disabled. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 27: Figure 39. Stream Video Compression Options In The Recording Profile Stream Settings
QUANTIZER – enter MIN and MAX values from 0 for the best quality to 51 for the worst quality. The default and recommended values are from MIN 17 to MAX 28. FRAME RATE – set available frame rate. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 28: Figure 40. Stream Audio Options In The Recording Profile Stream Settings
STREAM PORT – enter free RTSP stream port number. For multiple profiles with stream enabled – set different port numbers. It is recommended to consult with network administrator for avoiding conflict with other streams. Press save button to create or update profile. Or press cancel button to discard the changes. Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 29: Storage - Disc Space And Service Management
DICOM archive, oldest saved and not sent to DICOM archive, Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 30: Manual Deleting
− When dates are entered, press delete button. On the left side of the Manual Deleting page, you can see the information about disk space, and statistics of the manual deletion process. Statistics can be updated by pressing refresh button Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 31: Service
Service status information can also be updated by pressing refresh button About VS and license Displays about VS product and license information. License can be registered by filling small form and pressing registration button Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 32: Image/Video Access From Hospital Network
NOTE! Registration requires internet access to https://lic.softneta.com. Image/Video access from hospital network Using browser, login to MedDream DICOM Viewer on http://127.0.0.1/meddream, user and password are saved in C:\VideoStation\login.txt. Only one connection is allowed (depends on MedDream DICOM viewer license). Functional test When the physical and software installation is completely done, we recommend do some tests before start working. -
Page 33: Security Considerations
WebSocket is also restricted by IP address. Password During MedDream VideoStation installation will offer to enter passwords for “root” user (have full access to database) and “vsuser” user (access to DICOM viewer web application). Passwords is randomized, but can be changed. Manually... -
Page 34: Other Programs
Access audio and video devices Must ensure, that OS or other programs allows to access video and audio devices for MedDream VideoStation recorder application (recorder.exe). Ensure, that audio and video devices drivers is up to date and no other programs is conflicting with them. Must ensure, that no other application is in use of the same device –... -
Page 35: Figures
Figure 33. Display calibration options in the Recording profile Device settings ..............24 Figure 34. Recording and video output options in the Recording profile Recording settings ..........25 Figure 35. Video encoding options in the Recording profile Recording settings ..............26 Meddream VideoStation functionalities v4.6.1 Install Manual... -
Page 36: Index
Explanation of symbols used ..................................5 Firewall ........................................35 Functional test ......................................34 General consideration ....................................9 General settings ......................................17 Image/Video access from hospital network ............................... 34 Install software ......................................10 Installator........................................36 Introduction ........................................8 Meddream VideoStation functionalities v4.6.1 Install Manual... - Page 37 Software uninstalls ..................................... 15 Storage - disc space and service management ............................31 Stream settings ......................................27 Technical specification ....................................34 Update software ......................................13 VideoStation Setup ..................................... 16 Warnings regarding residual risks ................................. 7 Meddream VideoStation functionalities v4.6.1 Install Manual...
- Page 38 Medical device class: Regulation (EU) 2017/745 Class IIb medical device FDA cleared ID of the notified body: 0197 Document version 1.0 Date of issue: 2022-08-04 Language: EN Softneta UAB K.Barsausko str. 59B LT-51423 Kaunas, Lithuania Meddream VideoStation functionalities v4.6.1 Install Manual...
Need help?
Do you have a question about the MedDream and is the answer not in the manual?
Questions and answers