Operation
Charging the device
•
Connect the supplied USB charging cable to the
charging port on the device an the other to a 5V
power adaptor (not included).
•
The power/charging LED indicator will flash red
and green when charging. When fully charged, the
LED indicator will light up green.
•
Note: charging time is approximately 6 hours.
Using the device
•
Press the Power button to turn the device on.
Press repeatedly to change the vibration speed/
intensity. There are 3 built-in speed modes and 1
auto mode. Press again to turn the device off.
•
Place the device on the desired body part to
massage and roll the device around.
•
Note: the device will automatically turn off after 15
minutes.
Only use device:
- On a dry surface of the body, over clothing, by lightly pressing
and moving across the body for approximately 60 seconds
per region
- On the body's soft tissue, as desired, without producing pain or
discomfort — do not use on the head or bony area of the body.
- Bruising can occur regardless of the control setting or pressure
applied. Check treated areas frequently and immediately stop
using the device at the first sign of pain or discomfort.
12