Advertisement
Operation
Charging the device
• Connect the supplied AC adaptor to the power port on the device
and the other end to a power outlet.
Power on and using the device
Once connected to a power outlet, the Power button on the control
panel will start flashing and go into standby mode. When flashing,
press the power button again to turn the device on (flashing will
stop and light up). Press the Mode button to start smart mode (air
compression + feet roller). Press repeatedly to choose between different
modes (3 built-in modes):
• Default: Smart mode (air compression + feet roller)
• 2nd mode: Air compression
• 3rd mode: Feet roller mode
When the device is on, press the Heat button repeatedly to switch
between the different heat settings. The Heat button will light up
corresponding to the current heating function setting:
• Green light: low heat
• Red light: high heat
• No light: heating function off
Press the Intensity button to adjust intensity levels, with the device
having 3 built-in intensity settings. The Intensity button will light up
corresponding to the current intensity setting:
•
Green light: low intensity
•
Blue light: medium intensity
•
Red light: high intensity.
8 8
Advertisement
