Specifications - JVC LT-37DM7BJ Instructions Manual

Technical information
100Hz Clear Motion Drive
Most conventional LCD panel uses 50 frames per second (50 Hz) to display an image which needs long holding
time (time it takes to display single frame), causing blurring or ghost images when there is rapid or complex
movement across the screen - a phenomenon common to all LCD panels.
This TV is equipped with JVC's original "100Hz Clear Motion Drive" technology, which displays two frames (the
original plus the new interpolated frame) in the time a 50 Hz set displays a single frame. Resulting to double the
typical rate, 100 frames per second (100 Hz) and halve the holding time without reducing brightness or contrast.
By using this technology you will be able to reduce blurring or ghost images when there is rapid or complex
movement across the screen.
By using "Demo", you can display the differences between conventional LCD (50 Hz) and LCD panel equipped
with "100Hz Clear Motion Drive".
erience /----
Moving image of LCD panel equipped with "100Hz
Clear Motion Drive" (100 frames per second)
*1 To simulate Moving image of conventional LCD, the TV will display two same frames at a time.
* The illustrations are emphasized to make clear differences between LCD panel equipped with "100Hz Clear Motion
Drive" and conventional LCD.
Set "Demo" to "On" "Off".  "Demo" (P. 36)

When set to "On", it automatically enters demonstration every time no operation is made for approximately 3

minutes. To stop automatic demonstration, set "Demo" to "Off" .
When the images are 60 frames per second (60 Hz), it will be produced as 120 frames per second (120 Hz)

59
(continued)
The "DynaPix" ticker will run
right to left
You can confirm the differences
of the two LCD's with actual
moving images
Moving image of 50 Hz conventional
LCD (50 frames per second)
*1
Specifications
Main unit
Model
Broadcasting systems CCIR I
TV broadcast : PAL
Colour systems
External input : PAL, NTSC 3.58/4.43 MHz
Digital : E21-E68 (Frequency : 474 MHz-850 MHz)

 Analogue :
Channels and frequencies
UNITED KINGDOM : E21-E69 (UHF)
IRELAND : IR A-IR J, E2-E12, E21-E69 (VHF/UHF)
Sound-multiplex systems NICAM (I)
Digital : MHEG 5 UK profile
Teletext systems
Analogue : FLOF (Fastext), WST (World Standard System).
Power requirements AC 220 V - 240 V, 50 Hz
Audio output (Rated power output) 10 W + 10 W
Speakers (4 cm x 16 cm) oval x 2
Power consumption 169 W
[standby] [0.6 W]
Screen size
(visible area size measured diagonally) 94 cm
Dimensions (W x H x D: mm) 919 x 651.9 x 311.9
[without stand] [919 x 603.7 x 121.3]
Weights 21.9 kg
[without stand] [19.1 kg]
Accessories (See "Check accessories", P. 6)
A CAM (Conditional Access Module) for watching pay-TV digital channels can be installed (P. 8)

 DC power can be supplied to the indoor aerial (P. 57)
Terminals / Connectors
Terminal name Terminal type
Euroconnector x 1
EXT-1
(SCART connector)
Input / Output
terminals
Euroconnector x 1
EXT-2
(SCART connector)
RCA connectors x 3,
EXT-3
S-VIDEO connector x 1
EXT-4 RCA connectors x 5
Input terminals
EXT-5 (HDMI-1)
HDMI connector x 1
EXT-6 (HDMI-2)
PC INPUT D-SUB (15 pins) x 1 Analogue PC signal (P. 56)
AUDIO OUT RCA connectors x 2
DIGITAL
Output OPTICAL connector x1
AUDIO OUT
terminals
Stereo mini-jack x 1
Headphone
(3.5 mm in diameter)
We may change the design and specifications without notice.

LT-37DM7BJ
Signal type (IN) Signal type (OUT) Notes
Composite video, S-video,
TV out
Analogue RGB, AUDIO L / R
Dubbing out
Composite video, S-video, (S-VIDEO out is "T-V LINK"
Analogue RGB, AUDIO L / R available only for compatible
digital channels)
Composite video, S-video
AUDIO L / R
Analogue component
(576i (625i) / 480i (525i),
Progressive : 576p (625p) / 480p (525p),
HD : 1080i (1125i), 720p (750p))
AUDIO L / R
HDMI
(576i (625i) / 480i (525i) /
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p))
Audio L / R
Digital audio
(48 kHz,16 bit
linear PCM /
Dolby Digital)
Headphone
output
60