Hisense V43TX User Manual page 9

• Then press the MENU/OK bu�on and a
secondary menu with camera op�ons will pop up.
• Press the LEFT bu�on or RIGHT bu�on un�l
the Camera Loop icon (last op�on) is highlighted in
red and press the MENU/OK bu�on bu�on to
confirm.
• Now the SCAN mode is ac�vated and the monitor
will automa�cally switch between the paired Baby
Units with an interval of 10 seconds.
• On the top of the LCD display you will see the
Loop icon.
• Press the EXIT bu�on to exit the menu.
• To deac�vate this mode, follow the steps explained
in sec�on 4.2 and select any of the paired Baby
Units you want to connect to.
4.4 Dele�ng the Baby Unit (Camera)
Press the MENU/OK bu�on on your Parent Unit and
the menu screen will pop up.
• Press the LEFT bu�on or RIGHT bu�on un�l
the PAIR icon is highlighted in red.
• Then press the MENU/OK bu�on and a
secondary menu with camera op�ons will pop up.
• Press the LEFT bu�on or RIGHT bu�on to
select the desired Baby Unit to delete and press the
MENU/OK bu�on bu�on.
• The chosen Baby Unit will start blinking. Press and
hold the PAIR bu�on (10) in the back of a Baby Unit
you want to keep.
• The above procedure will automa�cally remove the
Baby Unit you want to delete.
The Baby Unit you want to keep will overwrite the
posi�on of the Baby Unit you deleted.
• Press the EXIT bu�on to exit the menu.
9