Hisense V43TX User Manual page 8

NOTE: If there is more than one Baby Unit to be
paired, repeat the above steps for each one
individually.
4.2 Switching between the paired Baby
Units (Cameras)
NOTE: This func�on is only available when two or
more cameras are paired.
• To switch between the paired cameras, press the
MENU/OK bu�on on your Parent Unit and the
menu screen will pop up.
• Press the LEFT bu�on or RIGHT bu�on un�l
the CAM icon is highlighted in red.
• Then press the MENU/OK bu�on and a
secondary menu with camera op�ons will pop up.
• Press the LEFT bu�on or RIGHT bu�on to
select the desired Baby Unit you want to connect to
and press the MENU/OK bu�on bu�on to confirm.
• Image from the selected Baby Unit will display on
the screen.
• On the top of the LCD display you will see the
number of the Baby Unit it is connected to.
• Press the EXIT bu�on to exit the menu.
4.3 Scan Mode - Automa�c switching
between the paired Baby Units (Cameras)
You can set the SCAN (loop) mode and each paired
Baby Unit will be displayed on the screen for 10
seconds and then the screen will automa�cally change
to the next paired Baby Unit.
• Press the MENU/OK bu�on on your Parent Unit
and the menu screen will pop up.
• Press the LEFT bu�on or RIGHT bu�on un�l
the CAM icon is highlighted in red.
8