Sharpening The Blade - Amazon B07V3QLZ5Y Manual

EN
NOTICE
Some lubrication solutions may interact with the
wood what may affect the look of the wood. Ask your dealer for
an accurate lubrication solution�
8.2

Sharpening the blade

Use quality oil sharpening stones� Lubricate them with an accurate
lubrication solution�
1� Remove the blade (E) from the tool�
2� Place the cutting edge (K) against the sharpening stone at
approximately 25° angle�
3� Slightly lift the blade (E) to a 30° angle.
4� Pull the blade (E) backwards to sharpen the cutting edge (K)�
Repeat until sharpened�
5� Draw the sharpened cutting edge (K) across the corner of a
scrap piece of wood to remove burr�
6� Reassemble the tool�
10
25°
30°