New Construction - JBL AS5 Simple Setup Manual

AS Series Owner's Manual

New Construction

Step One:
Remove the grille from the
speaker frame.
Step Four:
Nail or screw the speaker-frame
assembly to the wall studs and
route the wires through the
frame opening.
After the Drywall is Installed
Step Five:
Cut the drywall.
9/11/98 12:51 PM Page 6
1-1/2"
1-1/2"
1-1/2"
Step Two:
Determine the correct speaker
location.
Step Six:
Connect the speaker wires to
the baffle assembly and install
baffle assembly in frame. Do
not overtighten the baffle
screws.
Step Three:
Attach the proper mounting
brackets, marked and preset at
3/8" , 1/2" , 5/8" , and 3/4" , corre-
sponding to the thickness of
the dry wall, to the speaker
frame.
Step Seven:
Replace the metal grille.