Advertisement
Available languages
Available languages
1
Quick Installation Guide
LAUDA 4G Gateway
Fig. 1: Principle of the cloud connection
Installation
Fig. 2: Gateway with antenna
Fig. 3: Gateway with power supply
10 / 24
The gateway is approved for the Integral IN product line.
The LAUDA.LIVE wireless gateway enables access to the LAUDA Cloud
independently of the customer network LAUDA.LIVE and uses a cellular
connection for this purpose. The gateway is connected to the LAUDA
device via the Ethernet interface.
The gateway is preconfigured for LAUDA KG devices.
1.
Connect the supplied antenna to the antenna socket of the gateway.
2.
Connect the gateway to the LAUDA device via the Ethernet inter-
face. You can use the supplied Ethernet cable (1.5 m) for this purpose.
If the cable is too short, you can use any standard CAT5.E LAN cable
to connect the gateway to the LAUDA device.
3.
Supply the gateway with voltage via the supplied power unit. To do so,
connect the power supply unit to the power socket of the gateway.
4.
The Ethernet interface of the LAUDA device LAUDA.LIVE must
be configured for DHCP, so that the wireless gateway can access
LAUDA.LIVE (please refer to the operating manual of the constant
temperature equipment for further information). The constant tem-
perature equipment thereby obtains its IP address from the wireless
gateway.
The gateway is preconfigured as a DHCP server by
default; if this is not possible due to customer-specific
requirements, please contact LAUDA Service. This
particularly applies if the LAUDA devices are to be
integrated LAUDA.LIVE locally in the network (e.g. in
addition to a control station computer or web server).
LAUDA 4G Gateway and M2M SIM cards
V1
Advertisement
