sprogs SPG-71830 Assembly Instructions

Parts:
Right Side Panel Left Side Panel
Front Bottom Panel
Back Panel
Back Bottom Panel
Finished Edge
Step 1: Using phillips head screwdriver
(not included) and hardware provided,
attach casters to Bottom Panels as
shown.
Step 3: Insert Front Shelf
Panel into mortise of Left Side
Panel. Make sure to align back
grooves. Insert hex screws into
pre-drilled holes in Left Side
Panel. Tighten down halfway.
ASSEMBLY INSTRUCTIONS
Front Shelf Panel
Top Panel
Notice - KEEP BACK GROOVES ALIGNED - Do Not Drill!
Step 5: Insert Front Bot-
tom Panel into mortise of
Left Side Panel. Make
sure to align back
grooves. Insert hex
screws into pre-drilled
holes in Left Side Panel.
Tighten down halfway.
(4) Front Small
(2)Small Front Shelf -
Divider - ⁄ "
1
4
(2) Back Shelf Panel
Front Center Divider
Step 2: Insert Top Panel into
mortise of Left Side Panel. Make
sure to align back grooves. Insert
hex screws into pre-drilled holes
in Left Side Panel. Tighten down
halfway.
Step 4: Insert Front Center Divider into
mortise of Top Panel. Make sure to align
notches of Front Center Divider with Cen-
ter Shelf. Insert hex screws into pre-drilled
holes in Top Panel. Tighten down halfway.
1 ⁄ "
4
Allen Wrench
(28) Hex Screws
Set of (4) Casters
with hardware
Phillips Head Screwdriver
(Not Included)
Step 6: Insert Small Front
Shelf into mortises of Left
Side Panel and Front Center
Divider.