Download Print this page

sprogs SPG-70930 Assembly Instructions

Parts:

(1) 5/8" thick shelf

(2) 1/8" thick shelves

(2) Sides

(1) Top and Bottom

Step 1: Attach Top, Bottom, and 5/8" thick shelf

into a Side piece using (6) supplied Hex screws

and Allen wrench provided. Back grooves in Top

and Bottom, -cuts that go all the way through from

short end to short end, align with 3/8" deep back

groove in Side piece. Back grooves face inwards

torwards middle of Side piece. Slots in 5/8" thick

shelves also point torwards 3/8" deep back groove

in Side piece.

For assistance, call: Customer Service 1-866-619-3458

SPG-70930 ASSEMBLY INSTRUCTIONS

(2) Backs

(2) 5/8" thick and (2) 1/8" thick dividers

(20) Hex

screws

Step 2: Slide (2) 1/8" thick shelves into

place between 5/8" thick shelf and Top

and Bottom. No hardware is required in

this step.

(1) Allen wrench

Table of Contents

Do you have a question about the SPG-70930 and is the answer not in the manual?

Page 1 SPG-70930 ASSEMBLY INSTRUCTIONS Parts: (1) 5/8” thick shelf Hardware: (20) Hex (1) Allen wrench screws (2) Backs (2) 1/8” thick shelves (2) Sides (1) Top and Bottom (2) 5/8” thick and (2) 1/8” thick dividers Step 1: Attach Top, Bottom, and 5/8” thick shelf Step 2: Slide (2) 1/8”...
Page 2 Step 3: Attach (2) 5/8” thick dividers to Top and Step 4: Slide (2) Backs into place using Bottom pieces using (8) supplied Hex screws and back grooves in Top, Bottom, and 5/8” thick Allen wrench. Slots in 5/8” thick dividers scissor shelf.