Related Manuals for PLAYGROUND IDEAS SWING MONSTER TRUCK FLAT
Summary of Contents for PLAYGROUND IDEAS SWING MONSTER TRUCK FLAT
- Page 1 SWING MONSTER TRUCK FLAT Instructions Author: Socheata Kong www.playgroundideas.org...
- Page 2 You may not alter, To the maximum extent permitted by law, in no event will Playground Ideas be liable for any transform, or build upon this work but you may create and add new work to the Playground- loss or damage including without limitation, direct, indirect or consequential loss or damage, IDEAS design library to share.
- Page 3 Cut the sidewall off of one side of a large mining truck tire or tractor tire and cut off both sidewalls of four car tires. Cut through the tire tread. First, use a utility knife to cut the rubber of the tire tread until you reach the steel wire.
- Page 4 Place the end of the car tire treads underneath the truck tire and drill holes through the tire tread into the truck tire sidewall and where the car tire treads and truck tire tread touch. Then, attach the car tire tread and truck tire together with bolts, nuts, and washers.
- Page 5 150cm / 5’ 23cm / 9” This element requires soft fall material and can overlap with other elements. Please refer to the Playground Ideas Safety Handbook. www.playgroundideas.org...
- Page 6 If you like this Swing Monster Truck Flat, please check out these elements below as well: Swing Tractor Flat Swing Truck Tire Maxi Hammock Hammock Swing Tractor Flat Swing Monster Maxi Hammock Truck Half www.playgroundideas.org...
Need help?
Do you have a question about the SWING MONSTER TRUCK FLAT and is the answer not in the manual?
Questions and answers