CHECK ACTIVITY LEVEL
Clients can check their activity level by turning the Activ8
tracker up and down. The device will show progress
towards the set daily target.
Note: disable the display completely by entering a target
of 0 kcal.
charge indicator
It's recommended to recharge the battery at least every
3-4 weeks to secure measured activity data!
John F Kennedylaan 3, 5555XC, Valkenswaard, The Netherlands
support@activ8all.com
1
DOWNLOAD APPLICATION
Open the following link in your default browser:
Download, store and unzip Activ8RecordingTool.zip
on your desktop. Discard the warning "not commonly
downloaded and could be dangerous".
3
CONNECT YOUR ACTIV8
Connect the Activ8 tracker to a PC using
the USB adaptor. A window will open.
Note: the first time you connect it may take a minute
before the window opens.
IMPORTANT
Make sure you are fully charged at all times.
Charging : red light is on. Fully charged: red light is off.
Professional
2
INSTALL DRIVER
Open the folder "Desktop\Activ8 Recording Tool\driver"
and right-click on the file "atmel_devices_cdc.inf" and
select "Install".
In case you get a security warning, click "OPEN", when
you get the question "Do you want the following pro-
gram to make changes to your computer?", click "YES".
You should see a message that the operation was com-
pleted successful.
4
START THE RECORDING TOOL
Open the folder "Activ8 Recording Tool" on your desktop
and doubleclick "Activ8.exe" to start the Activ8 recording
tool application.
Specifications are subject to change without notice. © 2014 All Rights Reserved
Need help?
Do you have a question about the Professional activity level tracker and is the answer not in the manual?
Questions and answers