Page 1
Edison Series Flip Board Tools required: • Hex Key (Supplied) • Phillips Screwdriver (4x6 & 4x8 only) Two person assembly recommended Standard Parts: Board Upright Tray Crossbeam Leg Assembly Knob Spring Washer Socket Head Screw Oval Cap Round Cap Optional Parts:...
Page 2
1. Assemble Base(E) to Upright(B) using using Socket Head Screws(H). Tighten screws and repeat for opposite side. 2. Attach Crossbeam(D) to Base Assembly from Step 1 using Socket Head Screws(H). Locking plates on Uprights should face the center. Tighten screws and repeat on other side. 3.