Related Manuals for AUTOWANDERER TOOL R-134a R-22
Summary of Contents for AUTOWANDERER TOOL R-134a R-22
- Page 1 4 Way A/C Diagnostic Manifold Gauge Set for Refrigerants Charging （ R-134a R-22, R-410A, R-404A) Please read the manual carefully before operation and implement it according to relevant regulations.
- Page 2 9. Do not overreach. Keep proper footing and balance at all times. 10. ONLY USE REFRIGERANT R-134a R-22, R-410A, R-404A WITH THIS A/C MANIFOLD GAUGE SET. 11. Do not start an engine in an enclosed area (like a garage).
- Page 3 should use this product. 15. When warming up an engine in preparation for checking of the A/C system, make sure the vehicle’s transmission is placed in “Park” and the emergency brake is applied. 16. Refrigerant can cause severe frostbite if it comes in contact with skin. Follow the safety warnings and instructions provided by the refrigerant manufacturer.
- Page 4 LP: Low Pressure HP: High Pressure...
- Page 5 OPERATION PREPARATION OPERATION 1. Check the integrity of the product and the accuracy of the gauge needle (calibrate by adjusting the calibration screw)before using. 2. Connect one end of the Blue Hose to the LP Hose Connector (8) and the other end to the Blue Coupler (6).
- Page 6 RECOVERY / EVACUATION 1. Turn on the refrigerant recovery system / vacuum pump. 2. Open the Black Evacuation Valve (3), open both Coupler (6, 7), open LP Manifold Valve (1), HP Manifold Valve (2). 3. Read the amount of vacuum on the Blue LP Gauge. 4.
Need help?
Do you have a question about the R-134a R-22 and is the answer not in the manual?
Questions and answers