Cleaning And Maintenance - Promis KG-200 Manual

Wait until the burner is fully switch ON and adjust the flame by
turning the knob clockwise or counterclockwise according your
needs.
To make the temporary shutdown of the burner, turn the knob
clockwise to the OFF position.
After cooking, or before storing the product, turn OFF the
burner by turning clockwise the cylinder valve's knob till's close
and wait for the complete extinction of the flame.Then rotate
also the burner valve's knob to OFF position. This eliminates
residual gas inside the tube and in the stove as well.
Wait until the stove is cold before moving or storing, at least 30
minutes.
LPG CYLINDER EXCHANGE :
If, while using, the burner goes OFF, needs to replace the
cylinder.
Turn OFF the cylinder and the burner's knob to the close
position before proceeding with the unscrewing of the pressure
regulator.
To assembly of a new Gas cylinder, please follow the instruction
indicate in the chapter LPG gas cylinder assembling, always
respecting the Safety Instructions.

CLEANING AND MAINTENANCE:

Regularly clean your Stove between uses and especially after
extended periods of storage.
Before proceeding with cleaning and maintenance of the
product, make sure that the stove is properly cooled ; wait at
least 30 minutes after the last use.
Ensure that the cylinder valve and the burner's valve are in the
closed position. Remove the grid to perform the cleaning more
conveniently.
Use a damp sponge to remove heavier dirt, a damp cloth and
then a dry cloth are enough to clean and dry all surfaces.
Never use abrasive substances, solvents or flammable.
The only maintenance required for this equipment are the gas
17