Operating Installation Side; Service And Cleaning; Product Liability - iesy SDoT Server V3B User Manual

Table of Contents

Advertisement

User Manual V-180131-BHA00
1.6

Operating Installation Side

Operating temperature: 0°C ...+45°C
make sure that the fans and ventilation openings are not covered up
the permissible relative humidity at 45°C is 95 % (non-condensing) must be observed
the device must be protected from direct sunlight
1.7

Service and Cleaning

Clean the housing with a soft and slightly damp cloth. Never use solvents, as these could damage
the labelling or the housing. When cleaning, make sure that no liquid gets into the module or onto
the connections.
The fans and the redundant power supply provide interfaces that can be used for monitoring the
operating status. In the event of a fault, the corresponding component must be replaced.
1.8

Product Liability

In the following cases, the intended safety of the device may be impaired.
Liability for the device function then passes to the operator:
the device is not used according to the operating instructions
the device is used outside the described field of application (intended use)
unauthorized changes are made to the device by the operator
iesy GmbH
www.iesy.com | sales@iesy.com | Tel.: +49 (2354) 70655 0
Local court Iserlohn | HRA 9826 | USt-IdNr: DE339671635 | Managing Director: Dipl.-Ing. Martin Steger
Seite 6 von 27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdot server v3b 10g scSdot server v3b 10gSdot server v3b scSdot server v3b hsm

Table of Contents