Programmes; Buttons - Siemens WM6HXKO0DN User Manual And Installation Instructions

Table of Contents

Advertisement

Buttons

Below is an overview of the buttons and their setting options.
The selection of programme settings depends on the selected programme. You
can see the selection options for each programme in the overview for
→ "Programmes", Page 24.
Button
⁠ (Start / Reload /
Pause)
varioSpeed
⁠  
⁠ + (Ready in)
°C (Temperature)
⁠ (Spin Speed)
⁠ (mains switch)
Selection
¡ Start
¡ Cancel
¡ Pause
¡ Activate
¡ Deactivate
¡ Activate
¡ Deactivate
¡ Basic dosage
¡ Activate
¡ Deactivate
¡ Dispenser contents
¡ Basic dosage
1–24 hours
⁠ – 90 °C
⁠ – 1600
¡ Switch on
¡ Switch off
Familiarising yourself with your appliance en
Description
Start, cancel or pause the programme.
Activate or deactivate a short washing programme.
Note: Energy consumption increases.
The washing result is not affected by this.
Briefly press the button to activate or deactivate the
intelligent dosing system for liquid detergent
Press the button for approx. 3 seconds to set the
basic dosage.
→ "Intelligent dosing system", Page 38
Briefly press the button to activate or deactivate the
intelligent dosing system for fabric softener
quid detergent
Press the button for approx. 3 seconds to specify
the contents of the dispenser or set the basic
dosage.
→ "Intelligent dosing system", Page 38
Set the programme end.
The programme duration is already included in the
set number of hours.
Once the programme has started, the programme
duration is displayed.
Adjust the temperature in °C.
Adjust the spin speed or activate
If
⁠ is selected, the water is not drained at the
end of the washing cycle and the spin cycle is deac-
tivated. The laundry remains in the water used for
rinsing.
Switch the appliance on or off.
⁠ .
⁠ (Rinse Hold).
⁠ .
⁠ or li-
29

Advertisement

Table of Contents
loading

Table of Contents