Related Manuals for IBT IBT999
Summary of Contents for IBT IBT999
- Page 1 IBT999 ® Intel Gen. ® Core™ / Pentium ® Intel Q470E Mini-ITX Motherboard User’s Manual Version preliminary 1.2...
- Page 2 Trademarks All the trademarks, registrations and brands mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective owners. IBT999 User’s Manual...
- Page 3 0.1% by weight (1000 ppm) except for cadmium, limited to 0.01% by weight (100 ppm). • Lead (Pb) • Mercury (Hg) • Cadmium (Cd) • Hexavalent chromium (Cr6+) • Polybrominated biphenyls (PBB) • Polybrominated diphenyl ether (PBDE) IBT999 User’s Manual...
- Page 4 -20° C or above 80° C. To prevent from damages, the product must be used in a controlled environment. Care for your IBT products: • Before cleaning the PCB, unplug all cables and remove the battery.
- Page 5 BILLED FOR REPAIR AND SHIPPING CHARGES. Technical Support & Services Visit our website ( ibt.ca ) or contact us. ( support@ibt.ca ) If you need any further assistance from your distributor or sales representative, prepare the following information of your product and elaborate upon the problem.
-
Page 6: Table Of Contents
2.1.1 Installing the CPU ..............12 2.1.2 Installing the Memory ............12 Setting the Jumpers ................13 Jumper & Connector Locations on IBT999 ........14 Jumpers Quick Reference ..............15 2.4.1 eDP Panel Power Selection (JP5) ........15 2.4.2 Clear CMOS Data (JP9) ............16 2.4.3... - Page 7 Advanced Settings ................44 Chipset Settings ................56 Security Settings ................59 Boot Settings ..................61 Save & Exit Settings ................62 Appendix ..................63 I/O Port Address Map ................64 Interrupt Request Lines (IRQ) ............66 Watchdog Timer Configuration ............67 On-Board Connector Types ...............71 IBT999 User’s Manual...
-
Page 8: Chapter 1 General Information
Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Specifications • Block Diagram • Board View • Board Dimensions... -
Page 9: Introduction
Introduction ® ® IBT999 is a Mini-ITX motherboard based on 10 Gen. Intel Xeon ® ® Core™/ Pentium / Celeron processor. Designed for a broad range of markets, including industrial control & automation, digital signage, thin client, gaming, and transportation applications, it offers high-definition visual experience with high performance graphics processing. -
Page 10: Packing List
• IBT999 Motherboard Optional Accessories IBT provides optional accessories as follows. Please contact us or your dealer if you need any. • Audio Cable (Audio-34) •... -
Page 11: Specifications
BIOS AMI BIOS iSMART RAID 0/ 1/ 5/ 10 RAID iAMT Xeon-E / Core i7/ i5 DT CPU requiered iAMT version 14 vPro EuP /Erp 170mm x 170mm Dimensions RoHS 2.0 Certification CE (EN55032:2012); FCC Class B IBT999 User’s Manual... - Page 12 • Operating: 0 ~ 60 °C (32 ~ 140 °F) Temperature • Storage: -20 ~ 80 °C (-4 ~ 176 °F) Relative 0 ~ 95 %, non-condensing at 60 °C Humidity All specifications are subject to change without prior notice. IBT999 User’s Manual...
-
Page 13: Block Diagram
Block Diagram IBT999 User’s Manual... -
Page 14: Board View
General Information Board View IBT999 User’s Manual... - Page 15 DVI-IPort Audio Line-In USB 3.0 / HDMI Ports Audio Line-Out Microphone-In USB 3.0 Ports GbE LAN / USB 3.0 Ports GbE LAN / USB 3.0 Ports ＊The photos are for reference only. Some minor components may differ. IBT999 User’s Manual...
-
Page 16: Dimensions
General Information Dimensions IBT999 User’s Manual... - Page 17 This page is intentionally left blank. IBT999 User’s Manual...
-
Page 18: Chapter 2 Hardware Configuration
Chapter 2 Hardware Configuration This section provides information on jumper settings and connectors on the board in order to set up a workable system. On top of that, you will also need to install crucial pieces such as the CPU and the memory before using the product. The topics covered are: •... -
Page 19: Installations
To remove the module, press the ejector tabs outwards with your fintertips to eject the module. IBT999 User’s Manual... -
Page 20: Setting The Jumpers
1 2 3 When two pins of a jumper are encased in a jumper cap, this jumper is closed, i.e. turned On. When a jumper cap is removed from two jumper pins, this jumper is open, i.e. turned Off. IBT999 User’s Manual... - Page 21 I/O View Name Name DVI-I Port (CN1) Audio Line-In (CN11) USB 3.0 Port (CN2) Audio Line-Out (CN11) HDMI Port (CN3) Microphone-In (CN11) USB 3.0 Ports (CN4) GbE LAN Ports (CN5, CN8) IBT999 User’s Manual...
-
Page 22: Lvds Panel Power Selection (Jp6)
LVDS Panel Brightness Selection Factory Use Only Clearing ME Register Clearing CMOS Data Note: The board drawings below include all the connectors of different models. AT/ATX Mode Selection JP1: Setting Function Pin 1-2 Short/Closed Pin 2-3 Short/Closed IBT999 User’s Manual... - Page 23 1 x PCIe (x8) 2 x PCIe (x4) JP2: Close LVDS Panel Power Selection JP4: Setting Function 3.3V Pin 1-2 Short/Closed (default) Pin 2-3 Short/Closed LVDS Power Brightness Selection JP5: Setting Function 3.3V Pin 1-2 Short/Closed (default) Pin 2-3 Short/Closed IBT999 User’s Manual...
- Page 24 Appendix Clearing ME Register JP7: Setting Function Normal Pin 1-2 Short/Closed (default) Pin 2-3 Short/Closed Clear ME Clearing CMOS Data JP8: Setting Function Normal Pin 1-2 Short/Closed (default) Pin 2-3 Short/Closed Clear CMOS IBT999 User’s Manual...
-
Page 25: Connectors Quick Reference
LCD Backlight Connector M.2 E2230 Slot Front Panel Audio Connector Front Panel Settings Connector M.2 M2280 Slot ATX 12V Power Connector ATX_12V_2X1 Fan Power Connector CPU_FAN1, SYS_FAN1 RTC Lithium Battery Cell Connector BAT1 PCIe (x16) Slot PCIE1 IBT999 User’s Manual... -
Page 26: Com1 & Com2 Rs-232 Ports (Cn1)
RTS, Request to send CTS, Clear to send RI, Ring indicator J6: ATX Power Connector Signal Name Signal Name 3.3V 3.3V 3.3V -12V Ground Ground PS-ON Ground Ground Ground Ground Ground Power good 5VSB +12V +12V 3.3V Ground IBT999 User’s Manual... -
Page 27: Dual Usb 2.0 Connector (J11, J15)
Signal Name Ground Ground J12: LCD Backlight Connector Signal Name Signal Name +12V Brightness Control Backlight Enable Ground J17: Front Panel Audio Connector Signal Name Signal Name MIC IN_L Ground MIC IN_R LINE_R Ground Sense LINE_L Ground IBT999 User’s Manual... - Page 28 This connector connects to the system power LED on control panel. This LED will light when the system turns on. ATX_12V_2x1: ATX 12V Power Connector (ATX_12V_2x1) Signal Name Signal Name Ground +12V Ground +12V Ground +12V Ground +12V IBT999 User’s Manual...
- Page 29 SYS_FAN1, CPU_FAN1: Fan Power Connector Signal Name Signal Name Ground Rotation detection +12V Control IBT999 User’s Manual...
- Page 30 IBT999 User’s Manual...
- Page 31 This page is intentionally left blank. IBT999 User’s Manual...
-
Page 32: Chapter 3 Drivers Installation
Chapter 3 Drivers Installation This chapter introduces installation of the following installations: • Intel Chipset Software Installation Utility • Intel HD Graphics Driver • Realtek High Definition Audio Driver • Intel PRO LAN Network Drivers • Intel ME 14.x Drivers... -
Page 33: Introduction
INF files for Plug & Play function for Intel chipset components. Follow the instructions below to complete the installation. Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) CometLake Chipset Drivers on the right pane. IBT999 User’s Manual... - Page 34 Yes to accept the software license agreement and proceed with the installation process. On the Readme File Information screen, click Install. After the Intel Chipset Device Software has been installed, click Finish to complete the setup process. IBT999 User’s Manual...
-
Page 35: Vga Driver Installation
Click Intel(R) HD Graphics Driver. When the Welcome screen appears, click Next to continue. Click Yes to accept the license agreement and click Next. In the Readme File Information screen, click Next to continue. Whent Setup is complete, click Finish IBT999 User’s Manual... -
Page 36: Realtek High Definition Audio Driver
Click Realtek High Definition Audio Driver. On the Welcome screen of the InstallShield Wizard, click Next. The InstallShield Wizard will install the driver on your computer. When the InstallShield Wizard has successfully i nstalled the audio driver, restart the computer. IBT999 User’s Manual... -
Page 37: Intel(R) Pro Lan Network Drivers
On the next screen, click Install Drivers and Software. On the Welcome screen, click Next. Click Next to accept the license agreement. Select the program features you want installed and click Next. Click Install to begin the installation. IBT999 User’s Manual... -
Page 38: Intel(R) Me 14.X Drivers
On the next screen, click Intel(R) ME 14.x Drivers. On the Welcome screen, click Next. Click Next to accept the license agreement. In the Destination Folder screen, click Next. When the Intel management engine components have been successfully installed, click Finish. IBT999 User’s Manual... - Page 39 This page is intentionally left blank. IBT999 User’s Manual...
-
Page 40: Chapter 4 Bios Setup
Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Security Settings •... - Page 41 These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. IBT999 User’s Manual...
-
Page 42: Main Settings
4.3 Main Settings BIOS Setting Description Sets the date. Use the <Tab> key to switch System Date between the data elements. Set the time. Use the <Tab> key to switch System Time between the data elements. -
Page 43: Advanced Settings
Shows super IO monitor hardware status. Monitor USB Configuration Displays USB configuration parame ters. Network Stack Netowrk Stack settings. Configuration NVMe Configuration NVMe device option settings. [1]: eDP Configuration only on MOQ [2]: NVMe Configuration is available on MOQ IBT999 User’s Manual... - Page 44 4.4.1 Connectivity Configuration BIOS Setting Description This option configures connectivity. Auto Detection means that if Discrete solution is discovered it will be enabled by default. CNV1 Mode Otherwise Integrated solution (CNV1) will be enabled. Disable Integrated disables Integrated Solution. CoEx Manager mitigates radio coexistence issues between Intel WWAN (modem) and Intel WLAN (WiFi/BT).
- Page 45 Options: All, 1, 2, 3, 4, 5 Enabled for Windows XP and Linux (OS optimized for Hhyper-Threading Technology) and Hyper-Threading Disabled for other OS (OS not optimized for Hyper-Threading Technology). Enables / Disables AES (Advaned Encryption Standard). IBT999 User’s Manual...
- Page 46 4.4.3 Power & Performance BIOS Setting Description CPU – Power CPU – Power management control options. Management Control Select the performance state that the BIOS will Boot performance set starting from reset vector. mode Options: Max Battery, Maxc non-Turbo Performance, and Turbo Performance Intel(R) Allows more than two frequency ranges to be SpeedStep(tm)
- Page 47 When disabled, mEwill nbe put into ME ME State Temporarily Disabled Mode. When disabled, AMT BIOS Features are no longer able to access MEBx Setup. AMT BIOS Features Note: This option does not disable Manageability Features in FW. IBT999 User’s Manual...
- Page 48 4.4.5 Trusted Computing BIOS Setting Description Enables / Disables BIOS support for security Security Device device. OS will not show security device. TCG Support EFI protocol and INTIA interface will not be available. Scheule an operation for the security device. Pending operation Note: Your computer will reboot during restart in order to change state of security device.
- Page 49 (OS/S4 Sleep State). This option may be not effective Hibernation with some OS. Selects an ACPI sleep state where the system will enter ACPI Sleep when the Suspend button is pressed. State Options: Suspend Disabled, S3 (Suspend to RAM) IBT999 User’s Manual...
- Page 50 4.4.7 LVDS (eDP/DP) Configuration Note: LVDS (eDP/DP) configuration is only available for IBT999AF series and IBT999EF. BIOS Setting Description LVDS (eDP/DP) Support Enables / Disables LVDS (eDP/ DP). Selects a panel color depth as 18 or 24 Panel Color Depth (VESA or JEIDA) bit.
- Page 51 RS232 • RS485 TX Low Active Device Mode* • RS485 with Termination TX Low Active (for Port 1/2 only) • RS422 • RS422 with Termination *Remarks: Device Mode is supported on IBT999AF(E)-Q and IBT999AF(E)-W, but not IBT999EF(E)-H. IBT999 User’s Manual...
- Page 52 F81964 Hardware Monitor BIOS Setting Description Enables / Disables the CPU smart fan feature. CPU Smart Fan Control Options: Disabled / 50 °C / 60 °C / 70 °C / 80 °C Enables / Disables the system smart fan feature. System Smart Fan Control Options: Disabled / 50 °C / 60 °C / 70 °C / 80 °C...
- Page 53 Host Controller. Device power-up Auto uses default value for a Root port it is delay 100ms. But for a Hub port, the delay is taken from Hub descriptor. Options: Auto / Manual IBT999 User’s Manual...
- Page 54 4.4.10 Network Stack Configuration BIOS Setting Description Network Stack Enables / Disables UEFI Network Stack. 4.4.11 NVMe Configuration...
-
Page 55: Chipset Settings
BIOS Setting Description System Agent (SA) System Agent (SA) parameters Configuration PCH-IO Configuration PCH parameters 4.5.1 System Agent (SA) Configuration BIOS Setting Description Graphics Configures the graphics settings. Configuration VT-d Checks if VT-d function on MCH is supported. IBT999 User’s Manual... - Page 56 4.5.1.1. Graphics Configuration BIOS Setting Description Select which of IGFX/PEG/PCI Graphics device should be primary display or select SG for Primary Display switchable Gfx. Options: Auto, IGFX, PEG, PCI, SG Selects the card used on the platform. Auto skips GPIO based Power Enable to dGPU. Select PCIE Card E1k Creek 4: DGPU Power Enable = Active Low.
- Page 57 Enables / Disables the SATA devi SATA Mode Selection Determines how SATA controller(s) operate. Options: AHCI / Intel RST Premium Serial ATA Ports Enables / Disables serial ports. SATA Ports Hot Plug Enables / Disables SATA Ports H otPlug. IBT999 User’s Manual...
-
Page 58: Security Settings
4.6 Security Settings BIOS Setting Description Administrator Sets an administrator password for the setup Password utility. User Password Sets a user password. Secure Boot Configures Secure Boot. 4.6.1 Secure Boot BIOS Setting Description Secure Boot feature is Active if Secure Boot is enabled. - Page 59 Restore DB variable to factory defaults. Enroll factory defaults or load certificates from a file. 1. Public key certificate: EFI_SIGNATIRE_LIST, Secure Boot variable EFI_CERT_X509 (DER), EFI_CERT_RSA2048 (bin), EFI_CERT_SHAxxx 2. Authenticated UEFI Variable 3. EFI PE/COFF image (SHA256) IBT999 User’s Manual...
-
Page 60: Boot Settings
4.7 Boot Settings BIOS Setting Description Number of seconds to wait for setup activation Setup Prompt key. Timeout 65535(0xFFFF) means indefinite waiting. Bootup NumLock Selects the keyboard NumLock state. State Quiet Boot Enables / Disables Quiet Boot option. Boot mode select Selects a Boot mode, Legacy / UEFI. -
Page 61: Save & Exit Settings
Restores / Loads defaults values for all the setup Restore Defaults options. Save as User Defaults Saves the changes done so far as User Defaults. Restores the user defaults to all the setup Restore User Defaults options. IBT999 User’s Manual... -
Page 62: Appendix
Appendix This section provides the mapping addresses of peripheral devices, the sample code of watchdog timer configuration, and types of on-board connectors. -
Page 63: I/O Port Address Map
I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used. Address Device Description 0x00000A00-0x00000A0F Motherboard resources 0x00000A10-0x00000A1F Motherboard resources 0x00000A20-0x00000A2F... - Page 64 PCI Express Root Complex 0x00000040-0x00000043 System timer 0x00000050-0x00000053 System timer 0x00001854-0x00001857 Motherboard resources 0x00002000-0x000020FE Motherboard resources 0x00004090-0x00004097 Standard SATA AHCI Controller 0x00004080-0x00004083 Standard SATA AHCI Controller 0x00004060-0x0000407F Standard SATA AHCI Controller 0x0000FFF8-0x0000FFFF Intel(R) Active Management Technology - SOL (COM5) IBT999 User’s Manual...
-
Page 65: Interrupt Request Lines (Irq)
Interrupt Request Lines (IRQ) Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board. Level Function IRQ 0 System timer IRQ 4 Communications Port (COM1) IRQ 3 Communications Port (COM2) IRQ 13... -
Page 66: Watchdog Timer Configuration
**endptr; char SIO; printf("Fintek 81964 watch dog program\n"); SIO = Init_F81964(); if (SIO == 0) printf("Can not detect Fintek 81964, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); IBT999 User’s Manual... - Page 67 bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); if (bTime) EnableWDT(bTime); } else DisableWDT(); return 0; //--------------------------------------------------------------------------- void EnableWDT(int interval) unsigned char bBuf; bBuf = Get_F81964_Reg(0x2B); bBuf &= (~0x20); Set_F81964_Reg(0x2B, bBuf); //Enable WDTO Set_F81964_LD(0x07); //switch to logic device 7 Set_F81964_Reg(0x30, 0x01);...
- Page 68 Init_Finish; F81964_BASE = 0x00; result = F81964_BASE; Init_Finish: return (result); //--------------------------------------------------------------------------- void Unlock_F81964 (void) outportb(F81964_INDEX_PORT, F81964_UNLOCK); outportb(F81964_INDEX_PORT, F81964_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81964 (void) outportb(F81964_INDEX_PORT, F81964_LOCK); //--------------------------------------------------------------------------- void Set_F81964_LD( unsigned char LD) Unlock_F81964(); outportb(F81964_INDEX_PORT, F81964_REG_LD); outportb(F81964_DATA_PORT, LD); Lock_F81964(); IBT999 User’s Manual...
- Page 69 //--------------------------------------------------------------------------- void Set_F81964_Reg( unsigned char REG, unsigned char DATA) Unlock_F81964(); outportb(F81964_INDEX_PORT, REG); outportb(F81964_DATA_PORT, DATA); Lock_F81964(); //--------------------------------------------------------------------------- unsigned char Get_F81964_Reg(unsigned char REG) unsigned char Result; Unlock_F81964(); outportb(F81964_INDEX_PORT, REG); Result = inportb(F81964_DATA_PORT); Lock_F81964(); return Result; //--------------------------------------------------------------------------- //--------------------------------------------------------------------------- // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE.
-
Page 70: On-Board Connector Types
Haoguo J11, J15 Connector DF11-8S-PA66H DF11-8DS-2C Dupont 10P Front Panel Audio E-call 2.54 mm-pitch Connector P2100-9S10H (female) Dupont 8P Front Panel Settings E-call 2.54 mm-pitch Connector P2100-8S (female) Fan Power CPU_FAN1, Techbest Molex Connector SYS_FAN1 W2-03I104132S1WT(A)-L 47054-1000 IBT999 User’s Manual...