Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for IBT IP300
Summary of Contents for IBT IP300
- Page 1 IP300 3.5-inch form factor ETX Base Board USER’S MANUAL Version 1.0A...
- Page 2 Corporation. All other product names or trademarks are properties of their respective owners. Please Note The manufacturer provides these documents as the latest version for the revision indicated. The material is subject to change without notice. IP300 User’ s Manual...
-
Page 3: Table Of Contents
Table of Contents Introduction...............1 Product Description ............1 Checklist................2 Board Dimensions.............3 Installations ..............5 Setting the Jumpers............6 Connectors on IP300............10 IP300 User’ s Manual... - Page 4 This page was intentionally left blank. IP300 User’ s Manual...
-
Page 5: Introduction
INTRODUCTION Introduction Product Description The IP300 3.5-inch base board is designed for ETX CPU modules with dimensions as an interface platform. It packs all the PC connectors for the ETX CPU module to be a high-performance functional embedded board. The IP300 includes the following features: •... -
Page 6: Checklist
INTRODUCTION Checklist Your IP300 package should include the items listed below. Damaged or missing items should be reported to your supplier. • The IP300 Embedded Little Board • This User’s Manual • Optional cables such as: • 1 Audio Cable •... -
Page 7: Board Dimensions
INTRODUCTION Board Dimensions IP300 User’ s Manual... - Page 8 INTRODUCTION This page is intentionally left blank. IP300 User’ s Manual...
-
Page 9: Installations
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IP300 in order to set up a workable system. The topics covered are: Setting the Jumpers............6 Connectors on IP300............10 IP300 User’ s Manual... -
Page 10: Setting The Jumpers
INSTALLATIONS Setting the Jumpers Jumpers are used on the IP300 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IP300 and their respective functions. - Page 11 INSTALLATIONS Jumper Locations on IP300 Jumpers on IP300 JP1: AT / ATX Power Select JP2: Master/Slave Select for CF Socket JP3: Secondary LAN Enable/Disable JP6: Panel Voltage Select J6, J12: RS232/RS422/RS485 (COM2) Selection JP8, J12: COM3/COM4 +5V/+12V Power Setting JP9: Microphone Bias Setting for ET863/ET815...
- Page 12 JP2: Master/Slave Select for CF Socket Setting Function Short/Closed Master Open Slave JP3: Secondary LAN Enable/Disable Setting LAN2 Function Pin 1-2 Enabled Short/Closed Pin 2-3 Disabled Short/Closed JP6: Panel Voltage Select Setting LAN1 Function Pin 1-2 3.3V Short/Closed Pin 2-3 Short/Closed IP300 User’ s Manual...
- Page 13 INSTALLATIONS J6, J12: RS232/RS422/RS485 (COM1/2) Selection Function RS232 RS422 RS485 J12: COM1/COM2 +5V/+12V Power Setting Function +12V JP8: COM3/COM4 +5V/+12V Power Setting Function +12V JP9: Microphone Bias Setting for ET863/ET815 Setting Function Short/Closed ET863 Open ET815 IP300 User’ s Manual...
-
Page 14: Connectors On Ip300
INSTALLATIONS Connectors on IP300 The connectors on IP300 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on IP300 and their respective functions. Connector Locations on IP300..........11 CON1A &... -
Page 15: Connector Locations On Ip300
INSTALLATIONS Connector Locations on IP300 Connectors on IP300 CON1A & CON1B: PC/104 Connector J1: Main Power Connector J2: Floppy Drive Connector J3: IDE1 Connector J4: IrDA Connector J5: 12V Fan Power Connector J17: 5V Fan Power Connector J8: Digital I/O Connector... -
Page 16: Con1A & Con1B: Pc/104 Connector
LA19 IRQ15 LA18 IRQ14 +12V LA17 DACK0 IOCHRDY MEMR DRQ0 SMEMW MEMW DACK5 SMEMR DRQ5 DACK6 DRQ6 ZA15 A16 DACK3 DACK7 DRQ3 DRQ7 DACK1 DRQ1 MASTER REFRESH KEY PIN IRQ7 IRQ6 IRQ5 IRQ4 IRQ3 DACK2 BALE IP300 User’ s Manual... -
Page 17: J1: Main Power Connector
Drive select 1 Ground Drive select 0 Ground Motor enable 1 Ground Direction Ground Step Ground Write data Ground Write gate Ground Track 00 Ground Write protect Ground Read data Ground Side 1 select Ground Diskette change IP300 User’ s Manual... -
Page 18: J3: Ide1 Connector
INSTALLATIONS J3: IDE1 Connector J3 is the IDE1 connector consisting of 44 pins headers. IP300 optionally comes with a cable kit containing two IDE cables connecting these connectors to your IDE devices. Signal Name Pin # Pin # Signal Name... -
Page 19: J5: 12V Fan Power Connector
PD2, parallel data 2 Select PD3, parallel data 3 Ground PD4, parallel data 4 Ground PD5, parallel data 5 Ground PD6, parallel data 6 Ground PD7, parallel data 7 Ground ACK, acknowledge Ground Busy Ground Paper empty Ground Select IP300 User’ s Manual... -
Page 20: J10: System Function Connector
Pin # Signal Name Ground Sleep Reset: Pins 7 and 8 This connector connects to the reset switch button of the system. Pin # Signal Name Ground Reset IP300 User’ s Manual... -
Page 21: J13: Pci Cardbus Connector
3 sockets for Line Out, Line In and Mic functions. The following table shows the pin assignments of this connector. Signal Name Pin # Pin # Signal Name Line Out R Line Out L Ground Ground Line In R Line In L Ground Ground BIAS Ground IP300 User’ s Manual... -
Page 22: J18, J19: Usb0 And Usb1 Connectors
Signal Name Ground USB2- USB3+ USB2+ USB3- Ground J20: LAN2 Connector J20 is a 10-pin header connecting an RJ45 cable for LAN2. Signal Name Pin # Pin # Signal Name LED1+ LED1- LED2- Ground LED2+ Ground IP300 User’ s Manual... -
Page 23: J21, J22: 1St And 2Nd Channel Lvds Connector
Pin # Signal Name DCD, Data carrier detect DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground Not Used IP300 User’ s Manual... -
Page 24: J25: Rj45 Connector For Lan1
Mouse data Keyboard data Ground Mouse Clock Keyboard Clock J27: VGA CRT Connector The pin assignments of the J27 VGA CRT connector are as follows: Signal Name Signal Name Green Blue DDCK N.C. DDDA HSYNC VSYNC IP300 User’ s Manual... -
Page 25: J29: Ide2 Connector
INSTALLATIONS J29: IDE2 Connector J29 is the IDE2 connector consisting of 44 pins headers. IP300 optionally comes with a cable kit containing two IDE cables connecting these connectors to your IDE devices. Signal Name Pin # Pin # Signal Name... - Page 26 INSTALLATIONS This page is intentionally left blank. IP300 User’ s Manual...
Need help?
Do you have a question about the IP300 and is the answer not in the manual?
Questions and answers