PEOPLE UNDER THE AGE OF 16 AWAY electrical wiring), damage to plumbing to the Row. D O N O T store any items on the Peloton FROM THE PELOTON ROW. (and any water damage associated with Row when it is stowed vertically, including...
What’s in the box What you’ll need Before starting assembly, verify that all parts are included and undamaged. Never use damaged parts. If any parts are missing or damaged, contact Member Support at support.onepeloton.com. 17mm hex Front Mounting socket Cover bracket Socket Power drill...
Make another mark at the center of the top opening. STOP! Peloton recommends professional installation of the Peloton Upright Wall WARNING: Do not drill near any electrical Anchor, such as an appliance installer, wire or water pipes.
Page 6
Tug on the mounting bracket to make sure it is secure. Your Peloton Upright Wall Anchor is ready for use. Whenever you are not using the Upright Wall Anchor, make sure that the tether is wrapped around the...
Power off the Row and unplug it. Pivot the touchscreen all the Move the seat all the way forward. Be Row tipping over, read and follow all the way down. careful not to pinch your fingers as instructions in the Upright Wall Anchor the seat moves freely.
Page 8
Carefully lower the touchscreen arm until WARNING: To avoid instability when you hear a click. Confirm that the touch- stowing the Row vertically, the touchscreen screen arm is locked into place before must be stored with the monitor arm in the attempting to move the Peloton Row.
Page 9
The wheels will now be engaged so it until it is fully upright. Be careful to leave if you're moving the Peloton Row, you can enough space between the Row and the wall roll it to the desired location.
B E F O R E E V E R Y C L A S S • Inspect the Peloton Row before use Center the Peloton Row in front of the Unwind the tether and loop the tether and and do not use if it appears damaged...
Need help?
Do you have a question about the ROW and is the answer not in the manual?
Questions and answers