Table of Contents
Advertisement
en operation
12.13 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡ The display shows the following
after drying: "End"
¡ or during operation:
Pull out the condensation con-
1.
tainer, keeping it level.
30
.
Empty the condensation container.
2.
Make sure that you insert the con-
densation container before operat-
ing the appliance.
→ "Inserting the condensation con-
tainer", Page 30
Inserting the condensation
container
Requirement: The condensation con-
tainer → Page 30 is removed from
the appliance.
Push the condensation container
▶
in as far as it will go.
Advertisement
Table of Contents
