Advertisement
Quick Links
mitouch
QUICK START GUIDE
Getting started
Remove the mitouch device
from the packaging.
Attaching the leads
Insert treatment lead into Port A when
using 2 electrode pads.
Insert treatment leads into Port A and
Port B when using 4 electrode pads.
Placement of the pads
6
Remove the plastic protectors from
the electrode pads and place pads
onto the skin, spanning the desired
treatment area. Pads should be placed
at least 6cm (2.3") apart, either side of
the affected area. (Examples 1 & 2).
Charging
Plug the USB charging cable into
the charging port of the device.
Charging indicator
Connect the charging cable to
a USB charging source.
Charge until the battery
indicator shows full.
Attaching the pads
Attach the adhesive electrode
pads to the press stud connectors
on the treatment lead (x2).
Turning ON
7
Press and hold ON/OFF button until
device turns on.
Advertisement
Related Manuals for Lifetech mitouch
Summary of Contents for Lifetech mitouch
- Page 1 QUICK START GUIDE Getting started Charging Charging indicator Remove the mitouch device Plug the USB charging cable into Connect the charging cable to from the packaging. the charging port of the device. a USB charging source. Charge until the battery indicator shows full.
- Page 2 (10 mins to pause the treatment. increments up to 60 mins). Press again to resume. Screen lock Turning OFF To lock the screen during treatment, Press button to manually turn OFF press the button to lock and unlock. the mitouch.
- Page 3 TREATMENT MODES EXPLAINED For best results, explore each mode and experiment with what works best for you. Treatment Time ON/OFF Button MICROCURRENT MODES PAIN PAIN+ RECOVER PERFORM (mc²) Pause Indicator A Port Screen Lock Indicator B Port A Intensity Button Battery Level Indicator Treatment Mode (Pain, Pain+, MC²...
Need help?
Do you have a question about the mitouch and is the answer not in the manual?
Questions and answers