Getting Started; Battery Installation; Battery Notice - VTech Alphabet Boat User Manual

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is OFF and the battery
cover, battery box and unit are all dry.
2. Locate the battery cover on the back of
the unit. Use a screwdriver to loosen the
screws.
3. Install 2 new AA (LR6/AM-3) batteries
following the diagram inside the
battery box. (The use of new, alkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover and tighten to secure. When closing the
battery cover ensure that the screws are securely tightened. This
will avoid any water leakage.

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult supervision.
DO NOT USE RECHARGEABLE BATTERIES
4