Advertisement
WARNING: PLEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING. PROFLOW WILL NOT
BE RESPONSIBLE FOR ANY DAMAGE AS A RESULT OF THE INCORRECT INSTALLATION OF
THIS PRODUCT. IT IS RECOMMENDED THAT A QUALIFIED AUTOMOTIVE TECHNICIAN
PERFORMS THIS INSTALLATION.
Description:
Proflow Performance's mechanical belt driven fuel pump utilizes o-ring sealed -10AN ports
which do not use thread sealant. It is recommended only to lubricate the o-rings on your fittings
before use.
A 100 micron fuel filter is recommended to be installed between the fuel tank and fuel pump
inlet as well as either a 10 or 40 micron fuel filter after the pump outlet (PFEFS301B).
Ensure this pump has a good gravity feed from the fuel tank to ease priming. A minimum fuel
line supply and return size of AN10 is recommended. A high flowing fuel pressure regulator is
highly recommended (PFEFS13110 or PFEFS13113).
Power Ratings:
Fuel Blend
Unleaded
E85
Methanol
EMAIL: sales@proflow.com.au
PHONE: 1300 879 879
Installation Manual
Universal Mechanical Fuel Pump
PFEFS11500
Carburetted (NA)
Fuel Injection (Boosted)
3000 HP
1800 HP
1000 HP
2500 HP
1600 HP
900 HP
Advertisement
Table of Contents
Related Manuals for ProFlow PFEFS11500
Summary of Contents for ProFlow PFEFS11500
- Page 1 THIS PRODUCT. IT IS RECOMMENDED THAT A QUALIFIED AUTOMOTIVE TECHNICIAN PERFORMS THIS INSTALLATION. Description: Proflow Performance’s mechanical belt driven fuel pump utilizes o-ring sealed -10AN ports which do not use thread sealant. It is recommended only to lubricate the o-rings on your fittings before use.
- Page 2 1. Relive the fuel system pressure and disconnect the negative battery terminal from the battery. 2. Find a suitable place on the engine to mount the Proflow fuel pump. Make sure the location of the pump is clear of all hot engine components and is clear of any other moving drivetrain components.
Need help?
Do you have a question about the PFEFS11500 and is the answer not in the manual?
Questions and answers