Advertisement
Applications of ibconnect products
Column
user manual
05
Minicolumn
06
07
08
Fixing the rings
Once the clips have been fixed to the surface,
line up the holes of the rings with the pivot bolts
of the clip. Once you have done this, press the
rings until the pivot bolts are inserted inside the
holes of the rings; you will hear a click.
Important: the two pivot bolts must be inserted
into the rings at the same time.
Once you have inserted all of the rings in the
respective pivot bolts of the clips, the system is
fully installed.
Creating diversions
A
Orgatech lets you create diversions in order to
better distribute the cable and avoid downspouts.
To do this, use the T-shaped diversion piece,
as shown in diagram 7. To attach it, follow the
steps described for joining rings.
Floor support.
When Orgatech is used as a cable downspout,
a metal base is used for stability or to attach it
to the floor. The base is supplied assembled
with a set of 4 rings, which are attached to the
ring with the Orgatech male pivot bolt.
For any queries related to the product, contact:
oficinatecnica@ib-connect.com
1 - 2
Advertisement
