Advertisement
user manual
01
click
1
2
3
A B
02
03
04
Connecting rings
To achieve the desired length of installation,
you can connect several Orgatech strips until
you reach the desired length.
To connect the rings, place the male and female
pivot bolts so that they are facing each other
and slide vertically, as shown in diagram 1, until
you hear the click of the clip, which indicates
that they have been correctly connected.
Releasing rings
If you need to release a ring, simply turn it
slightly while pushing it down, as shown in
diagram 2.
Fixing Orgatech
To fix orgatech to a flat surface, use the clips
supplied along with the screws, diagram 3.
Step 1. Screw the clip to the surface using a
crosshead screwdriver.
Step 2. Attach the rest of the clips, at a distance
of 160 mm between the centres of the clips.
It is advisable to place 7 clips per meter of
Orgatech, at 1 clip per 8 rings.
Step 3. Line up the holes in the rings with the
pivot bolts of the clips and press until you hear
the click.
Important: the two pivot bolts must be
inserted in the rings at the same time.
Repeat the operation until Orgatech is fully
fixed.
Applications of ibconnect products
With downspout to the floor.
5 - 6
Advertisement
