Do you have a question about the D-Code and is the answer not in the manual?
Questions and answers
Annika Ekman
May 25, 2025
I have a shower tray with a set of legs Duravit D code. I am not sure how to attach them. There were no instuctions.
1 comments:
Mr. Anderson
May 26, 2025
To attach the legs to the DURAVIT D-Code shower tray:
1. Use the mounting feet specifically designed for the D-Code series. 2. Ensure the shower tray length is ≤ 1000 mm. 3. Position the legs to support the tray evenly. 4. Adjust the installation height between 125–185 mm, or 130–160 mm if using a noise reduction set. 5. Refer to related products to confirm compatibility with your specific shower tray model.
No specific step-by-step attachment instructions are provided in the context.
Need help?
Do you have a question about the D-Code and is the answer not in the manual?
Questions and answers
I have a shower tray with a set of legs Duravit D code. I am not sure how to attach them. There were no instuctions.
To attach the legs to the DURAVIT D-Code shower tray:
1. Use the mounting feet specifically designed for the D-Code series.
2. Ensure the shower tray length is ≤ 1000 mm.
3. Position the legs to support the tray evenly.
4. Adjust the installation height between 125–185 mm, or 130–160 mm if using a noise reduction set.
5. Refer to related products to confirm compatibility with your specific shower tray model.
No specific step-by-step attachment instructions are provided in the context.
This answer is automatically generated