Page 1
Operating instructions pneumatic Heat Transfer Press LTS 750 PA with interchangeable plates LOTUS PRESS s.r.l. LOTUS TRANSFER PRESS SOLUTIONS GmbH & Co. KG Via Giambellino 14a Anklamer Straße 38 20146 Milan ITALY 10115 Berlin GERMANY Tel. +39. 02. 48 95 03 86 Fax +39.
Page 2
Operating Instructions LTS 750 BAG Thank you very much for buying one of our Lotus LTS 750/760 heat transfer presses. We are sure you will capitalise on this excellent unit for years if you take the time to read these instructions carefully. Introduction Please study these instructions carefully before transporting, mounting, using, or main- taining the transfer press, as they will give you important directions for a safe handling.
Operating Instructions LTS 750 BAG Inhalt Warranty ........................... 4 Technical Data ........................4 General Safety Instructions ....................5 Intended use and improper use ................... 5 Safety instructions ......................5 Danger Warnings ......................6 Environmental conditions ....................7 Installation and transport ....................8 Positioning and electrical connection .................
Any claims of consequential costs of a loss or damage, e.g. loss of production, are ex- plicitly excluded from this warranty. No distributor, representative or agent is authorised to assume for Lotus Press any other obligation or liability or to submit a statement different from the one mentioned above.
CE declaration of conformity. Furthermore, in this case Lotus Press S.R.L. will no longer be liable for the machine. The machine is to be connected to a 230 V power supply; this voltage is dangerous when it is contacted.
Operating Instructions Danger Warnings LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 6 / 27...
The manipulation or replacement of parts of the machine is prohibited without the express consent of the manufacturer. Any modification of the machine not expressly authorized by Lotus Press will result in civil and criminal liability. It is forbidden to remove or manipulate a safety device installed on the machine.
Operating Instructions Installation and transport LTS 750 BAG Installation, maintenance, and repair work on electrical equipment must be carried out by qualified and/or competent personnel. The operator's workplace must be kept clean, tidy, and free from objects that may re- strict his freedom of movement.
Operating Instructions Positioning and electrical connection LTS 750 BAG The transfer press must be installed in a room with an electrical or lighting system ap- proved by the local authorities and which complies with the applicable electrical safety regulations. The existing power cable cross-sections must be suitable for the power requirements of the heat press of 2 KW is sufficient, preferably in a separate electric circuit.
Operating Instructions Cap and plate set LTS 750 BAG Easily exchangeable exchange sets are available for this model: 1. cap set with curved heating and pressure plate (see picture) 2. pressure plates for: • Kids or Girlie XS-Shirts Pants and sleeves •...
It may only be operated by one person at a time. The specified maximum temperature should not be exceeded during operation. Lotus Press cannot be held liable for errors, accidents, damage etc. resulting from fail- ure to follow these operating instructions.
Operating Instructions Commissioning of the transfer press LTS 750 BAG Before using the device, please connect the black power cable to a 220 V socket. Switch the transfer press on with the ON/OFF switch on the back of the instrument box (on the right side of the unit) by setting it to I.
Operating Instructions Parameter adjustment LTS 750 BAG Standardprogramm (00) Please press button S for 25 seconds. The display confirms access to the programm by showing up 00 followed by flashing and an audible signal. To choose programs 01, 02 and 03 please press button S again. Flex-Programm (01) Press button S •...
Operating Instructions Maintenance LTS 750 BAG Please read the instructions in this manual carefully before starting any maintenance or repair work. Maintenance and repairs must be carried out by an authorised service centre and/or specialised personnel using only original spare parts. Actions that do not comply with the following safety instructions may cause serious in- jury to the user and/or damage to the transfer press cause.
Operating Instructions Disassembly and disposal LTS 750 BAG If the machine must be disposed of, disassemble it according to the applicable regula- tions and dispose of the individual parts separately. The replaced parts must not be dis- persed in the environment but must be disposed of in accordance with the laws in force in the country where the machine is used.
Operating Instructions Spare Part´s LTS 750 BAG 75001 BASE 75002 ARM 75003 CYLINDER 75003 A FITTING AIR DISCHARGE 75003 AIR HOSE FITTING B Ø 10 75003 AIR HOSE FITTING C Ø 10 75003 AIR HOSE FITTING D Ø 10 75003 AIR HOSE AND FITTING Ø 10 75004 BOX INSTRUMENT 75005 COVER HEATING PLATE 75005 CONNECTOR METAL...
Page 17
Operating Instructions LTS 750 BAG 75029 COIL V 24 75030 PRESSURE REGULATOR 75031 AIR FILTER GROUP 75032 PRESSURE 75033 MANOMETER 75034 ELECTRONIC BOARD S2 75035 MASK S2 75036 CONNECTOR BOX FOR FRUIT ILME 5-POLE 75037 WIRING WITH SHEATH 75038 TRANSFORMER 220/24 75039 TRANSFORMER 220/12 75040 BLACKS START BUTTON 75041 WHITE BUTTON...
Operating Instructions Spare Part´s - Exploded view LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 18 / 27...
Page 19
Operating Instructions LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 19 / 27...
Page 20
Operating Instructions LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 20 / 27...
Page 21
Operating Instructions LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 21 / 27...
Page 22
Operating Instructions LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 22 / 27...
Page 23
Operating Instructions LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 23 / 27...
Operating Instructions Heating and pressure plate assembly LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 24 / 27...
Operating Instructions Electric Diagram LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 25 / 27...
Operating Instructions Electric Diagram - S2 LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 26 / 27...
Operating Instructions Pneumatic Diagram LTS 750 BAG All rights reserved, all indications without engagement, subject to modifications. LOTUS TRANSFERS PRESS SOLUTIONS GMBH & CO. KG Page 27 / 27...