HANNspree HG342PCB User Manual page 17

OSD
LANGUAGE
H-POSITION
V-POSITION
TRANSPARENCY
OSD TIME OUT
OSD ROTATION
OTHER
DP VERSION
ADAPTIVE-SYNC
HDR
CROSS
DDC/CI
RESET
Select 「LANGUAGE」 option to change the language of the OSD.
Enter the option and select a language.
Language depends on the selected model]
Select 「 H-POSITION」 option to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
Select 「 V-POSITION」 option to adjust the vertical position of the
OSD. Enter the option and adjust the level.
Select「TRANSPARENCY」option to adjust the transparency of
the OSD. Enter the option and adjust the level.
Select 「 OSD TIME OUT」option to set the OSD time out from 5
to 60 seconds. Enter the option and adjust the level.
Select「OSD ROTATION」option to rotate the window of the
OSD. Available settings are Normal/ 90/ 180/ 270.
Select the「DP VERSION」option to switch the function DP1 or
DP2
Select the「ADAPTIVE-SYNC」option to change the
ADAPTIVE-SYNC function.
Select the「HDR」option to change the HDR function.
Select the「CROSS」option to change the CROSS function.
Select the 「DDC/CI」option to switch the function On or Off.
[Dual input mode optional]
Select the「RESET」option to reset to the monitor's default
setting. This will erase the current settings.
17
User's Manual
[Reference only, the OSD