Download Print this page

Jaycar AC-1734 User Manual

Over one cat5e/cat6 (tcp/ip)

Advertisement

Quick Links

HDMI EXTENDER
OVER ONE CAT5E/CAT6 (TCP/IP)
User manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the AC-1734 and is the answer not in the manual?

Questions and answers

Summary of Contents for Jaycar AC-1734

  • Page 1 HDMI EXTENDER OVER ONE CAT5E/CAT6 (TCP/IP) User manual...
  • Page 2 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.  Introduction The HDMI Extender over ONE CAT 5E/6 is a tool for extending your HDMI signal over long distances to a compatible display.
  • Page 3 3. Support Deep Color up to 12 bits/color. 4. Support IR re-transmitting. 5. Uses one CAT5E/6 cable for data/DDC transmission. 6. Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality. 7. Cable testing showed that with 1080p resolution the HDMI input source can be 20meters away. 8.
  • Page 4 6. Operation Manual ------------------------------------------------------------------------------- 1PCS  Specifications Frequency Bandwidth 2.25Gbps (single link) HDMI Transmitter Input/ Output Ports 1x HDMI Female port/1 x CAT6 HDMI Receiver Input/ Output Ports 1 x HDMI Female port/1 x CAT6 Power Supply DC 5V~12V ESD Protection Human Body Model: ±...
  • Page 5 1.HDMI Extender Transmitter Front Panel Rear Panel 1. Power: Plug the 5V~12VDC power supply into the unit and connect the adaptor to AC wall outlet. 2. RESET: Factory reset button. When the Receiver system functions have been changed, Pressing this button for 10seconds can realize factory reset.
  • Page 6 over single CAT6 receiver. 6. LED indicator: When the DC power on, the indicator will be light. 2.HDMI Extender Receiver Front Panel Rear Panel 1. Power: Plug the 5V~12VDC power supply into the unit and connect the adaptor to AC wall outlet. 2.
  • Page 7 5. CAT6 IN: Connect the CAT6 in of the receiver with the CAT6 input of the HDMI over single CAT6 transmitter. 6. LED indicator: When the DC power on, the indicator will be light.  Application Example Transmitter and Receiver one by one application.
  • Page 8 Transmitter and Receiver one by N application, N can up to 253.