Advertisement
Programming & Testing
Programming
Connect power to the machine and verify that the machine displays a
normal startup sequence without errors.
When the startup sequence is complete, the display should indicate
"F-62".
You may now program the device using the following cards:
1.
Insert the System Key Card into the card reader . Remove when
prompted.
2.
Insert the Price & Configuration Card into the card reader .
Remove when prompted.
3.
Insert the Sitecode Definition Card into the card reader .
Remove when prompted.
Testing
Insert a Debit Maintenance Card or User Card into the card reader.
F 74 – This requires the correct programming and configuration card.
F 03 – This requires the correct Programming and Configuration card.
Off - Requires power cycle.
www.heartlandpaymentsystems.com
4
Advertisement
