Advertisement
Quick Links
Installation Guide
Cashless Laundry Kit - Contents
Qty
1
1
1
1
Qty
1
1
TBD
If you cannot locate and/or identify any of the components listed
above, please contact Micropayments Customer Service at:
www.heartlandpaymentsystems.com
Part Number
DSLIM-MDC-MC
AYS-168140
MFP-175009
TBD
Phillips Head Screw Driver – medium sized
Nut Driver (or Deep-Well socket)
Required tools to remove coin-drop/slide and coin vault
Tel: 800-332-4835
2115 Chapman Road, Suite 159, Chattanooga TN 37421
Alliance
Quantum & MDC
METERCASE MOUNT
Description
Meter Case Card Reader
(Quantum or MDC)
Interface Cable
Jumper
Mounting Bracket
Required Tools
Press 2
800.332.4835
Advertisement
Summary of Contents for Heartland Alliance Quantum & MDC
- Page 1 Installation Guide Alliance Quantum & MDC METERCASE MOUNT Cashless Laundry Kit - Contents Part Number Description Meter Case Card Reader DSLIM-MDC-MC (Quantum or MDC) AYS-168140 Interface Cable Jumper MFP-175009 Mounting Bracket Required Tools Phillips Head Screw Driver – medium sized Nut Driver (or Deep-Well socket) Required tools to remove coin-drop/slide and coin vault If you cannot locate and/or identify any of the components listed...
- Page 2 Install the reader in the mounting bracket with two of the screws re-moved in Step 1. The screws should not be over-tight. Note; not all machines require brackets. Please check with Heartland Micropayments customer service department for bracket part numbers. www.heartlandpaymentsystems.com...
- Page 3 Installation Insert the black connector on the installation harness into the mating connector on the rear of the reader. Make sure that the lock-ing tab faces up and locks into place with the protrusion on the top of the reader connector. Cable Part # AYS-168140 Insert the reader and bracket assembly into the coin vault opening.
- Page 4 Programming & Testing Programming Connect power to the machine and verify that the machine displays a normal startup sequence without errors. When the startup sequence is complete, the display should indicate “F-62”. You may now program the device using the following cards: Insert the System Key Card into the card reader .