SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. • Do not expose this device to water or moisture of any kind. •...
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com.
PRODUCT OVERVIEW BATTERY CHARGING Charge the battery before first use and at least once every three months to keep the battery fresh and capable of holding a full charge. Do not allow the battery to fully discharge, as doing so can damage it and reduce its maximum capacity. To charge the battery in the headphones, first ensure that the headphones are powered off.
BLUETOOTH PAIRING Perform the following steps to pair the headphones with your Bluetooth® device. 1. With the headphones powered off, press and hold the Multi-Function Button (MFB) for 3 seconds to power them on. The LED Indicator (Bluetooth) will alternately flash red and blue, indicating that the headphones are in Bluetooth pairing mode.
Page 6
Audio Playback If the headphones are paired with a Bluetooth® enabled device with support for the A2DP and AVRCP profiles, you can control the device using the controls on the headphones. Use the following headphone buttons to perform the indicated functions on your paired device.
Page 7
• While a call is in progress, momentarily press the Volume+/Next Track button to increase the volume level. When the maximum volume level is reached, the headphones will emit a beeping sound. • While a call is in progress, momentarily press the Volume-/Prev Track button to decrease the volume level.
TROUBLESHOOTING Q1: The headphones will not power on. Charge the battery. Q2: The battery will not charge. A2: Confirm that the USB power source is active. Check the cable connections. Try replacing the Micro USB cable with a known good one. Q3: The headphones will not pair with the Bluetooth®...
TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates.
Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Page 11
This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device.
Page 12
EU/UK Compliance Hereby, Monoprice Inc. declares that the radio equipment type Bluetooth Headphones is in compliance with Directives 2014/53/EU, 2011/65/EU with (EU) 2015/863, Radio Equipment Regulations 2017 and Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the declaration of Conformity is available at the following internet address: https://www.monoprice.eu/...
Need help?
Do you have a question about the BT-300ANC and is the answer not in the manual?
Questions and answers