SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. ...
This device contains a Lithium-ion battery. Dispose of this device only in accordance with local, state, or federal regulations for electronic waste. To prevent potential hearing damage, do not listen to these headphones at high volume levels for extended periods of time. Stop using these headphones immediately if you hear a ringing in ...
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm...
PRODUCT OVERVIEW Power/Pairing Button: Press and hold the button for 3 seconds to power the headphone on or off. With the headphones powered off, press and hold the button for at least 5 seconds to power the headphones on and enter pairing mode.
Page 7
2. Volume Up Button: Momentarily press the button to increase the volume level. Press and hold the button to advance to the beginning of the next track. Multifunction Button: With the headphones powered on, press the button to play or ...
Page 8
If two calls are in progress, double press the button to switch between the calls. 4. Volume Down Button: Momentarily press the button to decrease the volume level. Press and hold the button to go back to the beginning of the ...
The LED briefly illuminates red then turn off when the headphones are turned off. 6. Micro USB Charging Port: Use the included USB charging cable to connect the headphones to a USB power source (not included) for charging. Auxiliary Audio Input: Use the included 3.5mm audio cable to physically connect the ...
If the headphones are powered on and no connection has been made for 2 minutes, the headphones will automatically turn off. The LED Indicator (5) will briefly illuminate red and the headphones will say power off. Charging If the headphones are powered on and the battery charge level is ...
While the headphones are in pairing mode, open your phone's Bluetooth® settings, then search for and select the BT-200 entry. If prompted for a pass code, enter 0000 (four zeros). When the headphones are connected with a device, ...
Momentarily press the Volume Down (4) button decrease the volume level. Audio Playback Momentarily press the Multifunction (3) button to play or pause audio. During audio playback, press and hold the Volume Up (2) button for 1 second to skip ahead to the next track. During audio playback, press and hold the Volume Down (4) ...
Page 13
button to switch between the calls. TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates.
Nominal Impedance 32 ohms ±15% @1kHz Bluetooth® Chipset Qualcomm® CSR8635 Bluetooth Version Supported Bluetooth Profiles HSP, HFP, A2DP, AVRCP, DIP Bluetooth Pairing Name BT-200 Battery Type 500mAh Lithium-ion Charging Time About 2 hours Music/Talk Time Up to 25 hours Dimensions...
(2) this device must accept any interference received, including interference that may cause undesired operation. Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device.
Page 17
The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. Qualcomm® is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
Need help?
Do you have a question about the BT-200 and is the answer not in the manual?
Questions and answers