Setting The Date And Time - Invicta 0513BBB Instruction Manual And Warranty

chrono graPhs - setting the Date and time
1. to set the date, gently pull out the crown to the first click stop position (1) and
rotate clockwise or counter clockwise (varies by model) to the correct date. if you
are changing the date between 9:00 PM and 12:00 PM, the date must be set to the
following day, since the automatic date changing will not occur at midnight.
2. to set the time, gently pull the crown to the second click stop position (2) and
rotate clockwise to the time of day.
3. to set the day, (Big date and day Chronograph), gently pull the crown to the second
click stop position (2) and rotate counterclockwise to the correct day.
4. after the date and time are set, push the crown back to its normal operating posi-
tion (0) if you have yet to do so. The watch will begin running again.
20
chrono graPhs - setting the Date and time
If the center sweep hand or either of the hands on the 30-minute or tenths-of-a second
subdials are not correctly set to zero, simply follow these instructions.
1. to correct the center sweep hand, gently pull out the crown to the first click stop
position (1) and press the bottom pusher (Pusher B) until the hand lands at zero.
once set, push the crown back to its normal operating position (0).
2. to correct the 30-minute hand, gently pull out the crown to the second click stop
position (2) and press the top pusher (Pusher a) until the hand lands at zero. once
set, push the crown back to its normal operating position (0).
3. to correct the tenths-of-a-second hand, gently pull out the crown to the first click
stop position (1) and press the top pusher (Pusher a) until the hand lands at zero.
once set, push the crown back to its normal operating position (0).
21