Planet Networking & Communication HZS-532E-DE User Manual page 24

Z-Wave Smart Energy Meter
HZS-530 Series
Step 4 In the Trigger mode, the trigger time is set. An alarm notification is sent via sensor. If a
.
sensor is not installed, this step can be skipped.
Click the "Trigger"
button.
Click "Create Trigger".
Trigger: Name this
trigger.
Device: Select a Z-Wave
device.
Mode: Select "Arm" to
enable alarm.
Scene: When PIR
Sensor is triggered, the
Fan will turn on.
Optional: After
triggering for 5 seconds,
the Fan will turn off by
itself.
Switch to "AWAY" to
enable monitoring mode.
When one of Z-Wave
devices is triggered,
control pad will alarm.
- -
24